Get Seats, restraints -> Front seats Guide for Vauxhall Insignia 4 Door Second Generation (2018-2022)

Seats, restraints

47

Front seats

Seat position

9 Warning

Only drive with the seat correctly

adjusted.

9 Danger

Do not sit closer than 25 cm to the

steering wheel, to permit safe

airbag deployment.

Press both catches, pull the head

restraint upwards and remove.

●

Sit with buttocks as far back

against the backrest as possible.

Adjust the distance between the

seat and the pedals so that legs

are slightly angled when fully

pressing the pedals. Slide the

front passenger seat as far back

as possible.

9 Warning

Never adjust seats while driving as

they could move uncontrollably.

Set seat height high enough to

have a clear field of vision on all

sides and of all display

9 Warning

instruments. There should be at

least one hand of clearance

between head and the roof

frame. Your thighs should rest

lightly on the seat without

pressing into it.

Never store any objects under the

seats.

48

Seats, restraints

●

Sit with shoulders as far back

against the backrest as possible.

Set the backrest rake so that it is

possible to easily reach the

Backrest inclination

Manual seat adjustment

Drive only with engaged seats and

backrests.

steering wheel with arms slightly

bent. Maintain contact between

shoulders and the backrest when

turning the steering wheel. Do

not angle the backrest too far

back. We recommend a

Longitudinal adjustment

maximum rake of approx. 25°.

●

Adjust seat and steering wheel in

a way that the wrist rests on top

of the steering wheel while the

arm is fully extended and

Turn handwheel. Do not lean on

backrest when adjusting.

shoulders on the backrest.

●

Adjust the steering wheel 3 88.

Adjust the head restraint 3 45.

Adjust the thigh support so that

there is a space approx. two

fingers wide between the edge of

the seat and the hollow of the

knee.

Pull handle, slide seat, release

handle. Try to move the seat back and

forth to ensure that the seat is locked

in place.

●

Adjust the lumbar support so that

it supports the natural shape of

the spine.

Seats, restraints

49

Seat height

Seat inclination

Lumbar support

Lever pumping motion

Press switch

Adjust lumbar support using the four-

way switch to suit personal

requirements.

Moving support up and down: push

switch up or down.

up

: seat higher

top

: front end higher

down : seat lower

bottom : front end lower

Increasing and decreasing support:

push switch forwards or backwards.

50

Seats, restraints

Adjustable thigh support

Seat height

Keep a close watch on the seats

when adjusting them. Vehicle

passengers should be informed

accordingly.

Longitudinal adjustment

Pull the lever and slide the thigh

support.

Move switch upwards / downwards.

Seat inclination

Power seat adjustment

Move switch forwards / backwards.

9 Warning

Care must be taken when

operating the power seats. There

is a risk of injury, particularly for

children. Objects could become

trapped.

Seats, restraints

51

Tilt front of switch upwards /

downwards.

Lumbar support

Adjustable thigh support

Backrest inclination

Adjust lumbar support using the

four-way switch to suit personal

requirements.

Moving support up and down: push

switch up or down.

Pull the lever and slide the thigh

support.

Tilt switch forwards / backwards.

Increasing and decreasing support:

push switch forwards or backwards.

52

Seats, restraints

Automatic recall of memory positions

Memory positions are assigned to the

driver (1 or 2) using the respective key

and are automatically recalled when

the ignition is switched on. In addition,

a message in the Driver Information

Centre indicates the driver number,

identified by the used key. If the

ignition is switched on more than

three subsequent times with the

same key, the message will not be

displayed again until another key is

being used.

To stop recall movement, press one

of the memory-, power mirror- or

power seat controls.

Precondition is that Personalization

By Driver and Auto Memory Recall is

activated in the personal settings of

the Info Display.

Side bolster

Storing memory position

●

Adjust driver's seat and then

adjust exterior mirrors to desired

positions.

Adjust seat backrest width to suit

personal requirements.

Press e to reduce backrest width.

Press d to increase backrest width.

●

Press and hold MEM and 1 or 2

simultaneously until a chime

sounds.

Memory function for power seat

adjustment and exterior mirrors

Two different driver's seat and

exterior mirror settings can be stored.

Memorised settings 3 25.

Vehicle personalisation 3 122.

Recall of memory positions

This function can be activated or

deactivated in the vehicle

personalisation.

Select the relevant setting in the

Vehicle menu in the Info Display.

Press and hold button1 or 2 until the

stored seat and exterior mirror

positions have been reached.

Releasing the button during seat

movement cancels the recall.

Info Display 3 116.

Vehicle personalisation 3 122.

Seats, restraints

53

Easy exit function

Safety function

Armrest

For a convenient exit out of the

vehicle, the power driver seat moves

rearwards when vehicle is stationary.

If the driver's seat encounters

resistance during movement, the

recall may stop. After removing the

obstruction, press and hold the

appropriate memory position button

for two seconds. Try recalling the

memory position again. If the recall

does not operate, consult a

workshop.

To activate the easy exit function:

●

set selector lever to position P

(automatic transmission)

●

apply parking brake (manual

transmission)

●

switch off ignition

remove key from the ignition

switch

Overload

If the seat setting is electrically

overloaded, the power supply is

automatically cut-off for a short time.

●

open the driver's door

Push button and fold armrest

If the door has already been opened,

switch off ignition to activate easy

exit.

To stop movement, press one of the

memory or power seat controls.

Notice

upwards. Under the armrest there is

a storage compartment and an

inductive charger.

After an accident in which airbags

have been deployed, the memory

function for each position button will

be deactivated.

Inductive charging 3 94.

This function can be activated or

deactivated in the vehicle

personalisation.

Select the relevant setting in the

Vehicle menu in the Info Display.

Info Display 3 116.

Vehicle personalisation 3 122.

54

Seats, restraints

Stop-start system 3 156.

The seat heating buttons can be

pressed at any time to exit the

automatic seat heating for the

respective seat and control the seat

heating manually instead.

Heating

Automatic seat heating

Depending on the equipment, the

automatic seat heating can be

enabled in the vehicle personalisation

menu in the Info Display.

Ventilating

Vehicle personalisation 3 122.

When enabled, the heating of the

seats will be activated automatically

at vehicle start. The activation is

based on several parameters such as

vehicle interior temperature, intensity

and direction of the sun and

Adjust heating to the desired setting

by pressing ß for the respective seat

one or more times. The control

indicator in the button indicates the

setting.

Prolonged use of the highest setting

for people with sensitive skin is not

recommended.

The seat heating will be reduced

automatically from highest level to

medium level after 30 minutes.

Seat heating is operational when

engine is running and during an

Autostop.

temperature setting of the electronic

climate control system for the driver

and passenger side.

As the vehicle's interior warms up, the

seat heating level will be reduced

automatically until it finally goes off.

The seat heating level being provided

during the automatic operation is

shown by heated seat indicator lights.

If the passenger seat is unoccupied,

the automatic seat heating feature will

not activate the seat heating for that

seat.

Adjust ventilation to the desired

setting by pressing A for the

respective seat one or more times.

The control indicator in the button

indicates the setting.

Ventilated seats are operational when

engine is running and during an

Autostop.

Stop-start system 3 156.

Seats, restraints

55

Massage

Heating

Rear seats

Armrest

Press c to switch on the back

Activate seat heating by pressing ß

for the respective rear outer seat.

Activation is indicated by the LED in

the button.

Press ß once more to deactivate seat

heating.

massage function.

Fold armrest down. The armrest

contains cupholders.

To switch off, press c again. The

current massage procedure will be

ended, this may take a few seconds.

After ten minutes the massage

function is switched off automatically.

Prolonged use for people with

sensitive skin is not recommended.

Seat heating is operational when

engine is running and during an

Autostop.

Stop-start system 3 156.

Seats, restraints -> Front seats for Your Vauxhall Insignia 4 Door Second Generation (2018-2022)

Related Topics

Seats, restraints

Popular Owner Manuals

Latest Owner Manuals