110
Lighting
If the driver’s door is leftopen, the lights will
go out after approx. two minutes.
The light goes out immediately if the
ignition key is inserted in the starter switch
or the turn signal stalk is moved again.
Picture no: 14302s.tif
Picture no: 17920S.tif
Door-to-door lighting function 3
Activating the exterior lighting
with the remote control 3
The dipped beam illuminates for approx.
30 seconds after leaving the vehicle and
closing the driver’s door.
The welcome light function engages the
dipped beam for approx. 30 seconds.
To activate:
1. Switch off ignition.
This feature must be activated (once):
Unlock the vehicle, put the ignition key in
the starter switch and press the light switch
for approx. 5 seconds - see Fig. 14136 S on
next page.
2. Remove ignition key.
3. Open driver’s door.
4. Pull turn sig nal stalk tow ards steering
wheel.
To deactivate the function, contact a
workshop.
5. Close driver’s door.
English 
