62
Seats, Interior
Picture no: 14120s.tif
Picture no: 14121s.tif
Picture no: 14122s.tif
Height adjustment
Using the belts
9 Warning
For height adjustmentof the upper guiding
point of the front seat belts:
Fitting seat belts
Pull the belt out of the retractor and guide
it across the body, making certain that it is
not twisted.
O n pregna nt women in particular, the lap
belt must be positioned as low as
possible across the pelvis so as not to put
too much pressure on the abdomen.
1. Pull belt out slightly.
2. Push button on sliding adjuster.
3. Set desired height.
Insert the latch plate into the buckle. The
front seatbackrest mustnot be tilted back
too far or the seat belt will not op erate
properly. The recommended angle of
inclination is 25°.
4. Allow sliding adjuster to audibly latch.
Do not adjust height while driving.
Bulky clothing prevents the belt from fitting
properly. The belt must not rest against
hard or fragile objects in the pockets of
your clothing (e.g. ballpoint pens, keys,
spectacles) because these could cause
injury. Do not place any objects (e.g.
handbags, mobile phones) between the
belt and your body.
Make sure that the lap belt is not twisted
and that it fits snugly across the body.
Tension the beltfrequently while drivingby
tugging the diagonal part of the belt.
English 
