2011-2017 Vauxhall Meriva SUV Vehicle care -> Appearance care User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Vehicle care -> Appearance care for Your Vauxhall Meriva SUV Second Generation (2011-2017)

Vehicle care  
215  
Appearance care  
Caution  
Exterior care  
Locks  
Drive slowly. Do not drive jerkily.  
Excessive tractive force can  
damage the vehicle.  
The locks are lubricated at the factory  
using a high quality lock cylinder  
grease. Use de-icing agent only when  
absolutely necessary, as this has a  
degreasing effect and impairs lock  
function. After using de-icing agent,  
have the locks regreased by a  
workshop.  
After towing, unscrew the towing eye.  
Insert cap at the bottom and engage  
cap.  
Screw in the towing eye as far as it will  
go until it stops in a horizontal  
position.  
Washing  
The lashing eye at the rear  
underneath the vehicle must never be  
used as a towing eye.  
Attach a tow rope – or even better a  
tow bar – to the towing eye.  
The towing eye must only be used for  
towing and not for recovering a  
vehicle.  
The paintwork of your vehicle is  
exposed to environmental influences.  
Wash and wax your vehicle regularly.  
When using automatic vehicle  
washes, select a programme that  
includes waxing.  
Bird droppings, dead insects, resin,  
pollen and the like should be cleaned  
off immediately, as they contain  
aggressive constituents which can  
cause paint damage.  
216  
Vehicle care  
If using a vehicle wash, comply with  
the vehicle wash manufacturer's  
instructions. The windscreen wiper  
and rear window wiper must be  
switched off. Remove antenna and  
external accessories such as roof  
racks etc.  
If you wash your vehicle by hand,  
make sure that the insides of the  
wheel housings are also thoroughly  
rinsed out.  
Thoroughly rinse and leather-off the  
vehicle. Rinse leather frequently. Use  
separate leathers for painted and  
glass surfaces: remnants of wax on  
the windows will impair vision.  
Windows and windscreen wiper  
blades  
Use a soft lint-free cloth or chamois  
leather together with window cleaner  
and insect remover.  
When cleaning the rear window from  
inside, always wipe in parallel to the  
heating element to prevent damage.  
For mechanical removal of ice, use a  
sharp-edged ice scraper. Press the  
scraper firmly against the glass so  
that no dirt can get under it and  
scratch the glass.  
Exterior lights  
Headlight and other light covers are  
made of plastic. Do not use any  
abrasive or caustic agents, do not use  
an ice scraper, and do not clean them  
dry.  
Clean edges and folds on opened  
doors and the bonnet as well as the  
areas they cover.  
Polishing and waxing  
Remove dirt residues from smearing  
wiper blades by using a soft cloth and  
window cleaner. Also make sure to  
remove any residues such as wax,  
insect residues and similar from the  
window.  
Ice residues, pollution and continuous  
wiping on dry windows will damage or  
even destroy the wiper blades.  
Wax the vehicle regularly (at the  
latest when water no longer beads).  
Otherwise, the paintwork will dry out.  
Polishing is necessary only if the paint  
has become dull or if solid deposits  
have become attached to it.  
Paintwork polish with silicone forms a  
protective film, making waxing  
unnecessary.  
Caution  
Always use a cleaning agent with  
a pH value of 4 to 9.  
Do not use cleaning agents on hot  
surfaces.  
Have the door hinges of all doors  
greased by a workshop.  
Do not clean the engine compartment  
with a steam-jet or high-pressure jet  
cleaner.  
Plastic body parts must not be treated  
with wax or polishing agents.  

Related Topics

Popular Owner Manuals