188
Vehicle care
4. Pull bulb from bulb holder and
replace it.
Electrical system
5. Insert bulb holder into lamp
Fuses
housing and turn clockwise.
Data on the replacement fuse must
match the data on the defective fuse.
6. Insert lamp into bumper and let
engage.
There are three fuse boxes in the
vehicle:
Interior lights
Courtesy light, reading lights
●
●
in the front left of the engine
compartment
in left-hand drive vehicles, in the
interior behind the storage
compartment, or, in right-hand
drive vehicles, behind the
glovebox
Have bulbs replaced by a workshop.
2. Remove lamp downwards, taking
care not to pull on the cable.
Load compartment light
Have bulbs replaced by a workshop.
●
behind a cover on the left side of
the load compartment
Instrument panel
illumination
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognized by its
melted wire. Do not replace the fuse
until the cause of the fault has been
remedied.
Have bulbs replaced by a workshop.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
3. Remove bulb holder from lamp
housing by turning anticlockwise.
English 
