68
Seats, restraints
child's backbone, which is still very
weak, is under less strain in the event
of an accident.
The installation is permitted only
on the outer rear seats. The head
restraint has to be removed.
A child restraint system which has
been subjected to stress in an
accident must be replaced.
Suitable are child restraint systems
that comply with valid UN ECE
regulations. Check local laws and
regulations for mandatory use of child
restraint systems.
The following child restraints are
recommended for the following
weight classes:
●
Group II, Group III:
Graco Booster for children from
15 kg to 36 kg
The child is restrained by the seat
belt.
The installation is permitted on
the front passenger seat or the
rear seats.
●
Group 0+:
Ensure that the child restraint system
to be installed is compatible with the
vehicle type.
Ensure that the mounting location of
the child restraint system within the
vehicle is correct, see following
tables.
Allow children to enter and exit the
vehicle only on the side facing away
from the traffic.
When the child restraint system is not
in use, secure the seat with a seat belt
or remove it from the vehicle.
Römer Baby-Safe Plus installed
in the rearward facing position
with or without ISOFIX base for
children up to 13 kg
●
●
Group I:
RÖMER Duo Plus ISOFIX with or
without ISOFIX and Top-tether
for children from 9 kg to 18 kg
Group II, Group III:
Römer Kidfix XP with or without
ISOFIX for children from 15 kg to
36 kg
The child is restrained by the seat
belt.
Notice
Do not affix anything on the child
restraint systems and do not cover
them with any other materials.