Get Seats, restraints -> Rear seats Guide for Vauxhall Vivaro Van Third Generation (2019-2026)

52

Seats, restraints

Activate seat heating by turning the

thumb wheel " for the respective

front seat. There are three intensity

levels of heating.

To deactivate the seat heating turn

the thumb wheel " to 0.

Prolonged use of the highest setting

for people with sensitive skin is not

recommended.

Seat heating is operational when

engine is running and during an

Autostop.

Activate the back massage function

by pressing K. The LED in the button

illuminates to indicate activation.

The massage function is activated for

a period of 1 hour. During this time,

massage is performed in six cycles

with breaks in between.

To adjust the intensity of the massage

press L. Two levels of massage are

available.

Pressing K once more deactivates

massage function. The LED goes off.

The massage function is operational

when engine is running and during an

Autostop.

Rear seats

9 Warning

When seats are being adjusted or

folded, keep hands and feet away

from the moving area. Risk of

injury.

Ensure that there are no objects

on the anchor points or rails.

Never adjust seats while driving as

they could move uncontrollably.

Drive only with engaged seats and

backrests.

Stop-start system 3 161.

Massage

Stop-start system 3 161.

Depending on version the levers of

the seats can be located at different

places. The illustrations show

examples.

Seat backrest

Folding backrest down to table

position

1. Push the head restraint down or

remove it before folding the

backrest.

Head restraints 3 46.

Seats, restraints

53

2. If available fold up the armrest.

Fixed rear seats

Armrest 3 51.

Easy entry function

To permit an easy entrance to the

seats of the third row, the seats of the

second row can be tilted.

2. Pull the release lever and tilt the

seat to the front.

3. Pull the front lever or push the rear

lever to release the backrest.

4. Fold the backrest fully down.

Removing

Depending on version seats can be

removed.

1. Fold the backrest down to the

table position.

Pull the release lever and tilt seat to

the front.

To restore the original position tilt seat

back until it is engaged.

Unfolding the backrest

1. Pull the front lever or press the

rear lever.

2. Move the seat to the tilted

position.

2. Raise the backrest fully upwards

until it engages.

Tilted position

1. Fold the backrest down to the

table position.

54

Seats, restraints

1. Engage front mounts in the

anchorages.

Backrest inclination

3. Release each front mount by

pulling the respective lever.

4. Remove the seat.

Pull the front lever or push the rear

lever to release and adjust the

backrest.

Release the lever when the desired

position is obtained.

2. Push the levers to lock the front

mounts and tilt the seat back until

it is engaged.

Installing

3. Unfold the backrest.

Rear seats on rails

The single seats as well as the seat

bench seat can be moved individually

forwards and backwards. The

backrest of the seat bench is splitted.

Seats, restraints

55

Longitudinal adjustment

2. Pull the loop on the rear beyond

the point of resistance and tilt the

seat to the front.

The arrow has to be positioned within

the marking.

Raise the backrest fully upwards.

To release the seat, pull the front

handle upward or pull the loop on the

rear without going beyond the point of

resistance.

Slide the seat forwards or backwards.

Longitudinal adjustment of row with

seat bench

3. Remove the seat.

Removing

1. Fold the backrest down to the

table position.

Caution

Do not use the loop to lift the seat.

To move the seat bench or the single

seat along the full length of the rail,

fold down the backrest to the table

position.

Installing

1. The loop on the rear has to be in

the release position.

Release and move the seat by pulling

the loop on the rear without going

beyond the point of resistance.

56

Seats, restraints

Seat belts

Caution

Avoid contact between two seats.

This could cause significant wear

of the parts in contact.

1. Fold the backrest down to the

table position.

2. Pull the loop on the rear beyond

the point of resistance.

2. Place the front of the seat on the

rails and then tip the rear down.

The seat belts are locked during

heavy acceleration or deceleration of

the vehicle, holding the occupants in

the seat position. Therefore the risk of

injury is considerably reduced.

Caution

Do not use the loop to lift the seat.

3. Slide the seat until it engages.

4. Raise the backrest fully upwards.

9 Warning

Lounge position

The single seats on rails can be

placed facing forward or backward.

Fasten seat belt before each trip.

3. Slightly lift and turn the seat by

180° until it is engaged.

4. Raise the backrest fully upwards.

In the event of an accident, people

not wearing seat belts endanger

their fellow occupants and

themselves.

Seats, restraints -> Rear seats for Your Vauxhall Vivaro Van Third Generation (2019-2026)

Related Topics

Seats, restraints

Popular Owner Manuals

Latest Owner Manuals