Press the car symbol
in the bottom bar and go to Settings.
1
Go to Charging → Limit charging current.
Turn the function on.[1]
2
3
4
Adjust the amperage limit to your preferred value.
The amperage limit changes and the value is saved until you change it again. When your car is charging, the actual
amperage value and the limit are shown in the display.
>
Note
The amperage limit may vary between regions.
When you turn the function off, the amperage limit that you set isn't saved. This means that you need to set a new
limit if you turn the function on again.
[1]
Only available for AC charging.
7.2.2. Adding and managing charging schedules
You can set and activate a charging schedule for your car in the charging view. This means you can specify
when you want the car to charge, such as when plugged in overnight.
Note
The charging schedule setting only applies to AC charging. When using DC charging, it will always override the charging
schedule and start charging when the charging cable is plugged into the car.
Press the car symbol
in the bottom bar and go to Settings.
1
Go to Charging → Charging schedule.
2
3
4
Select start and stop times for the charging schedule by using the timer.
Activate the schedule by turning it on.
The timer is active and the scheduled charging time is visible in the display, both in the main area and in the driver
information area.
>
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
164 / 396
English 
