4. For occupants in the front seats, adjust the height of the seatbelt's upper anchor point.
Seatbelt upper anchor point
1. Hold the button on the upper anchor point down to allow it to slide up and down.
2. Place it as high as possible without the belt touching the throat or neck.
5. Tension the hip strap to remove slack by pulling upwards on the diagonal chest strap. It should be as straight and low as
possible, running below the abdomen.
Important
Pregnancy
Take extra care to follow all seating recommendations if the occupant is pregnant. Make sure that the seatbelt does
not cross the belly. The hip strap should be under the belly and the shoulder section should pass above it.
Releasing the seatbelt
6. Release the seatbelt by pressing the buckle button.
7. Guide the seatbelt back to its retracted position.
Important
Make sure the seatbelt retracts fully after using it. Closing a door with the seatbelt caught in the gap can damage both
the seatbelt and the door.
5.3.2. Seatbelt reminder
The car uses built-in sensors to detect if the driver or any of the passengers aren't using their seatbelts.
If the car detects any occupants that are not wearing their seatbelts, the system alerts the driver with a warning sound and the
seatbelt reminder symbol appears in the overhead console as well as the driver display.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
118 / 444
English 
