DRIVER SUPPORT
WHITE - the car then follows the stored
speed.
||
NOTE
If any of the Cruise Control buttons are held
depressed for several minutes then it is
blocked and deactivated. To be able to reacti-
vate Cruise Control, the car must be stopped
and the engine restarted.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h (20 mph).
Changing the stored speed
Related information
Stored speed is changed with short or long
Cruise control* (p. 192)
•
presses on the
or
steering wheel button.
To adjust +/- 5 km/h (+/- 5 mph):
The steering wheel buttons and display in cars with
speed limiter3.
Use short presses - each press gives
+/- 5 km/h (+/- 5 mph).
•
To start the cruise control:
To adjust +/- 1 km/h (+/- 1 mph):
Press the steering wheel button for CRUISE
•
Hold down the button and release it at the
required speed.
•
(without speed limiter) or
(with speed
limiter).
Last press made is stored in the memory.
>
The cruise control symbol (6) in the com-
bined instrument panel illuminates - Cruise
control is in standby mode.
If speed is increased using the accelerator pedal
prior to pressing the
/
button, then it is the
car's current speed when the button is pressed
that is stored.
To activate cruise control:
At the required speed - press the steering
wheel button or
•
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
the cruise control setting - the car returns to the
last stored speed when the accelerator pedal is
released.
.
>
The current speed is stored in the memory
and the combined instrument panel's
marking (5) illuminates at the selected speed
and the symbol (6) changes from GREY to
3
A Volvo dealer has updated information about what applies in each respective market.
194
* Option/accessory.
English 
