2018-2026 Volvo V60 SUV STARTING AND DRIVING -> Gear selector positions for automatic transmissions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

STARTING AND DRIVING -> Gear selector positions for automatic transmissions for Your Volvo V60 SUV Second Generation (2018-2026)

STARTING AND DRIVING  
To move to another gear from Park, the brake  
pedal must be depressed and the ignition in  
mode II. For vehicles with the small gear  
selector, the engine must be running.  
Gear selector positions for  
automatic transmissions  
With an automatic transmission, a suitable  
gear is selected automatically according to  
current speed and power requirements.  
When parking – apply the parking brake  
before shifting to Park.  
Selecting gears  
The gear selector is a shift-by-wire selector,  
where shifting is done electronically instead of  
mechanically. This makes shifting easier and  
the gear positions more distinct.  
WARNING  
Always apply the parking brake when park-  
ing on an incline. Selecting a gear or put-  
ting the automatic transmission in P may  
not be sufficient to keep the vehicle sta-  
tionary in all situations.  
Small gear selector and gear selector positions over-  
view.  
For the small gear selector, change gear posi-  
tion by pushing the spring-loaded gear selec-  
tor forward or rearward, or to the side for  
manual shifting.  
NOTE  
The gear selector must be in position P in  
order to lock the vehicle and set the alarm.  
Gear selector positions  
Park - P  
For the small gear selector, Park is activated  
using the P button next to the gear selector.  
For the large gear selector, Park is activated  
by moving the gear selector to position P.  
Large gear selector and gear selector positions over-  
view.  
For the large gear selector, change gear selec-  
tor position by pressing the gear selector for-  
ward or rearward, or to the left for manual  
shifting.  
In P mode, the transmission is mechanically  
locked.  
Select P when the vehicle is parked or when  
starting the engine. The vehicle must be sta-  
tionary when Park is selected.  
}}  
397  
STARTING AND DRIVING  
Help functions5  
||  
small gear selector, the engine must be run-  
ning.  
rent gear will be displayed in the instrument  
panel.  
For vehicles with the small gear selector, the  
system will shift to P automatically  
D drive mode  
Push the gear selector forward toward +  
D is the normal driving gear position. The  
transmission shifts up or down automatically  
depending on acceleration and speed.  
(plus) and release to shift up one gear.  
if the ignition is switched off while D or R  
is selected.  
Pull the gear selector backward toward –  
(minus) and release to shift down one  
gear.  
if the driver unbuckles the seat belt and  
opens the driver's door while the vehicle is  
running with the gear selector in a gear  
other than P.  
The vehicle must be stationary when the gear  
selector is moved from R to D.  
Push the gear selector to the side to the  
end position at D to return to D mode.  
Manual shifting mode - M  
To park a vehicle with an unbuckled seat belt  
and open door – end P mode by shifting to R  
or D again.  
The system will not automatically shift to P if  
the ignition is switched off while the gear  
selector is in the neutral position (N). This is to  
make it possible to wash the vehicle in an  
automatic car wash in which the vehicle is  
pulled forward on rolling wheels.  
Reverse - R  
Select R when backing up. The vehicle must  
be stationary when Reverse is selected.  
Overview of gear shift pattern in the instrument  
panel for large gear selector.  
Overview of gear shift pattern in the instrument  
panel for small gear selector.  
Neutral - N  
Manual shifting mode can be selected at any  
time during a drive. Engine braking will occur  
when the accelerator pedal is released.  
Manual shifting mode can be selected at any  
time during a drive. Engine braking will occur  
when the accelerator pedal is released.  
No gear is selected and the engine can be  
started. Apply the parking brake if the vehicle  
is stationary with the gear selector in N.  
Select manual shifting mode by moving the  
gear selector sideways from D to ±. The cur-  
Select manual shifting mode by moving the  
gear selector rearward from the D position.  
To move the gear selector from N to another  
gear, the brake pedal must be depressed and  
the ignition in mode II. For vehicles with the  
5
Does not apply to vehicles with the large gear selector.  
398  

Related Topics

Popular Owner Manuals