STARTING AND DRIVING
Ignition modes
Mode Functions
Mode Functions
The vehicle's ignition can be put in various
modes (levels) to make different functions
available.
To enable the use of a limited number of func-
tions when the engine is not running, the igni-
tion can be put in one of three different levels:
0, I and II. These levels are referred to as "igni-
tion modes" in the Owner's Manual.
0
The odometer, clock and tem-
perature gauge are illumi-
natedA.
I
The panoramic roof, power
windows, 12-volt electrical
socket in the passenger com-
partment, Bluetooth, naviga-
tion, phone, blower and wind-
shield wipers can be used.
•
•
The power* seats can be
adjusted.
•
•
•
•
The power windows can be
used.
The power seats can be
adjusted.
•
•
The following table shows which functions are
available in each ignition mode:
The center display is activated
and can be usedA.
The 12-volt electrical socket* in
the cargo compartment can be
used.
The infotainment system can
be usedA.
Electrical current will be taken
from the battery in this ignition
mode.
In this mode, the functions are
available for a limited time and
then switch off automatically.
II
The headlights illuminate.
•
•
Warning/indicator lights illumi-
nate for 5 seconds.
A number of other systems are
activated. However, seat and
rear window heating can only
be activated when the engine
is running.
•
This ignition mode uses a lot of
current from the battery and
should be avoided whenever
possible!
A
Also activated when the door is opened.
}}
* Option/accessory. 385
English 
