2018-2026 Volvo V60 SUV STARTING AND DRIVING -> Recovery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

STARTING AND DRIVING -> Recovery for Your Volvo V60 SUV Second Generation (2018-2026)

STARTING AND DRIVING  
5. Keep the towline taut when the towing  
vehicle slows down by applying light pres-  
sure to the brake pedal. This will help  
avoid jarring movements.  
Attaching and removing the  
WARNING  
towing eyelet  
Ignition mode II must be active – all  
airbags are deactivated in ignition  
mode I.  
Use the towing eyelet when towing. Screw  
the towing eyelet securely into place in the  
threaded outlet behind the cover on the right-  
hand side of the front and rear bumpers.  
6. Be prepared to apply the brakes to stop  
the vehicle.  
Always have the remote key in the  
vehicle when it is towed.  
NOTE  
Jump starting  
If the vehicle is equipped with a towbar,  
there is no rear attachment for the towing  
eye.  
Do not tow the vehicle to start the engine. Use  
an auxiliary battery if the start battery's charge  
level is so low that the engine cannot be  
started.  
WARNING  
The brake and steering servos do not work  
when the engine is off – it takes  
about 5 times more pressure on the brake  
pedal and steering requires much more  
effort than normal.  
Attaching the towing eyelet  
CAUTION  
Attempting to tow with the engine running  
could result in damage to the three-way  
catalytic converter.  
1. Turn on the hazard warning flashers.  
2. Attach the towline to the towing eyelet.  
3. Put the vehicle in ignition mode II – with-  
out pressing the brake pedal, turn the start  
knob clockwise and hold it there for about  
4 seconds. Release the knob, which will  
automatically return to its original position.  
Related information  
Attaching and removing the towing eyelet  
(p. 429)  
Hazard warning flashers (p. 158)  
Recovery (p. 431)  
Take out the towing eyelet, which is  
stored in a foam block under the floor in  
the cargo compartment.  
4. Move the gear selector to neutral (N) and  
release the parking brake.  
Jump starting using another battery  
(p. 422)  
If the battery charge level is too low, it  
may not be possible to release the parking  
brake. Connect an auxiliary battery to the  
vehicle if the battery is discharged.  
Selecting ignition mode (p. 386)  
Transmission (p. 395)  
> The towing vehicle can now start driv-  
ing.  
}}  
429  
STARTING AND DRIVING  
||  
4. Screw the towing eyelet into place as far  
as possible.  
Fasten the eyelet securing by, for example,  
inserting a lug wrench* through it and  
using this as a lever.  
Front: Remove the cover by pressing on  
the mark with a finger.  
Rear: Remove the cover by pressing on  
the mark with a finger while folding out  
the opposite side/corner.  
> The cover turns along its center line and  
can then be removed.  
> The cover turns along its center line and  
can then be removed.  
CAUTION  
It is important that the towing eye is  
screwed in securely as far as possible.  
430  
* Option/accessory.  
STARTING AND DRIVING  
To consider before using the towing eyelet  
Removing the towing eyelet  
Recovery  
In certain conditions, the towing eyelet  
may be used to pull the vehicle onto a flat-  
bed tow truck. The vehicle's position and  
ground clearance determines if this is pos-  
sible.  
Unscrew the towing eyelet after use and  
return it to its storage location in the foam  
block.  
This section refers to transporting the vehicle  
with a tow truck or similar vehicle.  
Call a professional towing service for assis-  
tance.  
Replace the cover on the bumper.  
In certain conditions, the towing eyelet can be  
used to pull the vehicle onto a flatbed tow  
truck.  
Related information  
If the incline of the tow truck is too steep  
or if the ground clearance under the vehi-  
cle is insufficient, attempting to pull it up  
using the towing eyelet may result in dam-  
age.  
Towing using a towline (p. 428)  
Recovery (p. 431)  
The vehicle's location and ground clearance  
determine if it can be lifted onto a tow truck. If  
the incline of the tow truck is too steep or if  
the ground clearance under the vehicle is  
insufficient, attempting to pull it up may result  
in damage. In this case, the vehicle should  
only be lifted with the tow truck's lifting equip-  
ment.  
Tool kit (p. 520)  
If necessary, lift the vehicle using the tow  
truck's lifting device instead of using the  
towing eyelet.  
WARNING  
No person or object should be behind the  
tow truck when the vehicle is lifted onto  
the bed of the truck.  
WARNING  
No person or object should be behind the  
tow truck when the vehicle is lifted onto  
the bed of the truck.  
CAUTION  
The towing eyelet is only intended for tow-  
ing on roads – not for pulling vehicles from  
ditches or any similar purpose involving  
severe strain. Call a tow truck for profes-  
sional assistance.  
CAUTION  
The towing eyelet is only intended for tow-  
ing on roads, and must not be used to pull  
vehicles from ditches or any similar pur-  
pose involving severe strain. Call a tow  
truck for professional assistance.  
}}  
431  

Related Topics

Popular Owner Manuals