06 Locks and alarm
position of the driver's seat2 and door mirrors
will be stored in the remote key's memory.
Keyless drive* – messages
NOTE
If all of the remote keys are removed from the
vehicle while the engine is running or if the
ignition modes (p. 79) is in mode II and all of
the doors are closed, a message will appear
in the instrument panel display and an audible
signal will sound.
If the vehicle is locked by pressing the but-
ton on one of the door handles or by
pressing the lock button on the remote
key, or if it is left unlocked for more than
30 minutes, the key memory function will
be deactivated.
The next time a door is opened by a person
with the same remote key in his/her posses-
sion, the driver's seat and door mirrors will
automatically move to the position that they
were in when the door was most recently
locked.
To reactivate the key's memory:
When at least one remote key has been
returned to the car, the message will be
erased in the display and the audible signal
will stop when:
Unlock the vehicle by pulling a door
•
handle with the remote key in your
possession or by pressing the unlock
button on the remote key.
NOTE
If several people carrying remote keys
approach the vehicle at the same time, the
driver's seat and door mirrors will assume
the positions they were in for the person
who opens the driver's door.
A door has been opened and closed
•
The remote key has been inserted in the
ignition slot
•
Related information
Keyless drive*– locking/unlocking (p. 159)
•
•
The OK button has been pressed. For the
location of this button, see Information
display – menu controls (p. 113)
•
Remote key – functions (p. 153)
See also power seats (p. 81) for information
on adjusting and storing the seat's position in
the seat memory.
06
2
Power seats only
}}
161
* Option/accessory, for more information, see Introduction.
English 
