06 Locks and alarm
4. To turn off the alarm, insert the remote
key in the ignition slot. This also applies
to vehicles equipped with the optional
keyless drive.
Keyless drive* – unlocking with key
blade
Keyless drive* – key memory
When you leave the vehicle with a remote key
in your possession and lock any door, the
If the remote key does not function normally
(weak battery, etc.), the vehicle can be
unlocked with the detachable key blade.
5. Press the cover back into place after the
door has been unlocked.
Related information
Keyless drive*– locking/unlocking (p. 159)
•
Alarm – general information (p. 169)
•
Driver's door keyhole cover
1. Remove the key blade from the remote
key (see Detachable key blade – detach-
ing/reinserting (p. 155) for instructions).
06
2. Press the key blade approx. 0.5 in. (1 cm)
straight up in the hole on the underside of
the keyhole cover.
> The cover will come off due to the
pressure exerted when the key blade is
pushed upward.
3. Insert the key blade as far as possible in
the driver's door lock. Turn the key blade
to unlock the driver's door. This will trig-
ger the alarm.
160
* Option/accessory, for more information, see Introduction.
English 
