06 Locks and alarm
||
Automatic closing
The power tailgate can be closed by pressing
Power tailgate – programming
Power tailgate – interruption
Automatic opening or closing the tailgate can
be interrupted in four ways:
The tailgate's maximum opening angle can be
programmed, which can be useful, for exam-
ple, if the tailgate has to be opened in a
garage with a low ceiling.
the -button on the tailgate (see the
illustration) or by pressing it down.
•
By pressing the
lighting panel.
button on the
button on the
WARNING
To do so:
•
Be sure that no one is near the tailgate
when it is opened or closed automatically.
The tailgate should never be obstructed in
any way when it is operated.
Open the tailgate manually, hold it at the
By pressing the
remote key.
•
desired maximum opening angle and
press the tailgate's closing button for at
least 3 seconds. When the tailgate is
released, programming is complete.
By pressing the button on the lower edge
of the tailgate.
•
•
By pressing the rubber-covered button
under the outer handle on the tailgate.
Related information
Locking/unlocking – tailgate (p. 166)
To remove this programming, open the
•
tailgate manually to a higher opening
angle and press the tailgate's closing but-
ton for at least 3 seconds.
•
If one of these actions is taken, the tailgate
will stop and reopen.
Pinch protection
Related information
Locking/unlocking – tailgate (p. 166)
If the tailgate is obstructed while it is being
operated, the pinch protection function is
activated.
•
If the tailgate is being opened, the electri-
cal function will be switched off and the
tailgate will stop.
•
06
If the tailgate is being closed, it will stop
and reopen.
•
Related information
Locking/unlocking – tailgate (p. 166)
•
168
English 
