10 Maintenance and servicing
2. Reinsert the headlight housing and lock-
ing pins. Check that they are correctly
inserted.
Bulbs – cover
Related information
Bulbs – headlight housing (p. 336)
•
•
•
•
The larger cover has to be removed in order
to change the high/low beam headlight bulbs.
Bulbs – low beam, Halogen (p. 338)
Bulbs – high beam, Halogen (p. 338)
Bulbs – extra high beam (p. 339)
The headlight housing must be properly
in place and the wiring connector cor-
rectly reconnected before the lighting is
switched on or the remote key is inserted
into the ignition slot.
Removing the cover to access the bulbs
10
3. Check that the lights function properly.
Related information
Bulbs – introduction (p. 335)
•
Bulbs – cover (p. 337)
•
Bulbs – specifications (p. 342)
•
NOTE
Before starting to replace a bulb, see
Bulbs – introduction (p. 335).
1. Loosen the cover's four retaining screws
(3-4 turns) with a Torx T20 tool (1). The
screws should not be removed com-
pletely.
2. Push the cover to the side.
3. Remove the cover.
Reinstall the cover in the reverse order.
337
English 
