10 Maintenance and servicing
6. Press the bulb holder into position in the
headlight housing.
Bulbs – extra high beam
The extra high beam bulb is concealed by the
larger cover.
Bulbs – front turn signals
The turn signal bulb is concealed behind the
smaller cover.
7. Reconnect the wiring connector to the
bulb holder.
Extra high beam2
10
8. Put the cover back into position and rein-
stall the headlight housing.
Related information
Bulbs – specifications (p. 342)
•
1. Remove the headlight housing from the
vehicle (see Bulbs – headlight housing
(p. 336)).
1. Remove the headlight housing from the
vehicle (see Bulbs – headlight housing
(p. 336)).
2. Remove the bulb holder by turning it
counterclockwise and pulling it out of the
headlight housing.
2. Remove the cover over the bulbs (see
Bulbs – cover (p. 337)).
3. Pull out the holder to access the bulb.
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the burned out bulb by pressing
it in slightly and turning it counterclock-
wise.
4. Remove the bulb holder from the head-
light housing by pulling it straight out.
5. Press the new bulb into the holder and
turn it clockwise.
5. Insert a new bulb in the holder. It can only
be inserted in one way.
2
Models with optional Active Bending Lights only.
}}
339
English 
