10 Maintenance and servicing
Bulbs – vanity mirror lighting
The vanity mirror bulbs are located behind the
lens.
Bulbs – specifications
Lighting func- Wat-
tion
Bulb
The following bulbs can be replaced by the
vehicles owner. All other bulbs should only be
replaced by a trained and qualified Volvo
service technician.
tage
Rear fog light
Backup lights
Brake lights
21
P21W LL
P21W LL
P21W LL
Removing the lens
10
21
Lighting func- Wat-
tion tage
Bulb
21
Cargo area
lighting
10
SV8.5
(length
43mm)
Extra high beam 55
(models with
H7 LL
Active Bending
Lights*)
NOTE
Low beam (hal-
ogen)
55
65
24
5
H11 LL
H9
Please consult a Volvo retailer’s Parts
department for the most up-to-date bulb
specifications.
High beam (hal-
ogen)
1. Insert a flat screwdriver under the lens
and carefully exert upward pressure to
release the retaining lugs.
Related information
Bulbs – introduction (p. 335)
Front turn sig-
nals
PY24W
C5W LL
•
2. Snap out the lens.
License plate
lighting
3. Use needle nose pliers to pull the bulb
straight to the side. Replace the bulb. Do
not exert too much pressure on the bulb
with the pliers to help avoid damaging it.
Vanity mirror
2
W2x4.6d
type T5
Front side
marker lights
5
W3W LL
Reinstalling the lens
1. Put the lens back into position.
2. Press it into place.
Glove compart-
ment lighting
5
SV8.5
(length
43mm)
Related information
Bulbs – specifications (p. 342)
•
342
* Option/accessory, for more information, see Introduction.
English 
