07 Driver support
||
At the same time a speed
range is marked:
Related information
Adaptive cruise control - ACC* (p. 206)
Adaptive cruise control* - managing
speed
•
Adaptive cruise control* - function
(p. 207)
•
To start the ACC:
•
Adaptive cruise control* - symbols and
messages (p. 219)
Press the steering wheel button
- a
•
similar WHITE symbol illuminates in the
combined instrument panel (8) which
shows that the adaptive cruise control is
in standby mode (p. 212).
the higher speed with GREEN marking is
the pre-programmed speed
•
•
the lower speed is the speed of the vehi-
cle in front.
To activate ACC:
At the required speed - press the steering
•
Changing the stored speed
Stored speed is changed with short or long
wheel button
or
.
>
The current speed is stored in the mem-
ory, the combined instrument panel
shows a "magnifying glass" (6) around
the stored speed for a second or so and
its marking changes from WHITE to
GREEN.
presses on the
ton.
or
steering wheel but-
To adjust +/- 5 km/h (+/- 5 mph):
Use short presses - each press gives
+/- 5 km/h (+/- 5 mph).
•
To adjust +/- 1 km/h (+/- 1 mph):
When this symbol changes colour
from WHITE to GREEN, the ACC is
active and the car maintains the
Hold down the button and release it at
the required speed.
•
stored speed.
Last press made is stored in the memory.
Only when the symbol shows
an image of another vehicle
is the distance to the vehicle
in front controlled by the
ACC.
If speed is increased using the accelerator
pedal prior to pressing the
/
button,
07
then it is the car's current speed when the
button is pressed that is stored.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
210
* Option/accessory, for more information, see Introduction.
English 
