07 Driver support
The boundary lines include the car's most
protruding parts, e.g. door mirrors and cor-
ners - also when the car is turning.
Park assist lines
IMPORTANT
Remember, that with the rear camera view
selected, the monitor only displays the
area behind the car. Be aware of the sides
and front of the car when manoeuvring in
reverse.
Cars with reversing sensors*
Boundary lines
Examples of how the park assist lines can be dis-
played for the driver.
The lines on the screen are projected as if
they were at ground level behind the car and
are directly related to steering wheel move-
ment, which shows the driver the path the car
will then take - also when the car is turning.
Coloured fields (one per sensor) show distance.
If the car is also equipped with Parking assis-
tance (p. 248) the distance is shown with col-
oured fields for each sensor that registers an
obstacle.
The system's lines.
NOTE
Boundary line, 30 cm zone backwards
from the car
The colour of the areas changes with
decreasing distance to the obstacle - from
green to yellow to red.
When reversing with a trailer which is
•
not connected electrically to the car,
the lines on the display show the route
the car will take - not the trailer.
Boundary line, free reversing zone
The red line (1) frames in a zone
approx. 30 cm back from the bumper.
07
Colour / paint
Green
Distance (metres)
0,8-1,5
The screen shows no lines when a
trailer is connected electrically to the
car's electrical system.
•
The yellow horizontal line (2) frames in a zone
up to approx. 1.5 m behind the bumper.
The parking camera is deactivated
automatically when towing a trailer if a
Volvo genuine trailer cable is used.
Yellow
0,4–0,8
•
The yellow side lines end approx. 2.0 m
behind the bumper.
Red
0–0,4
}}
253
* Option/accessory, for more information, see Introduction.
English 
