Instruments and controls
Combined instrument panel
1. Temperature gauge
between trip odometers by briefly pressing
the button once.
5. Cruise control indicator
See page 52.
6. Odometer
The odometer indicates the total distance the
car has travelled.
11. Outside temperature gauge
Displays outside temperature. When the
temperature lies between +2 °C and –5 °C, a
snowflake symbol is shown in the display.
This symbol serves as a warning for slippery
road surfaces.
When the car is or was stationary, the outside
temperature gauge may read a higher
reading than actual.
12. Clock
Turn the button to set the clock.
13. Fuel gauge
When the lamp in the instrument panel lights,
approximately 8 litres of usable fuel remain in
the tank.
14. Indicator and warning symbols
15. Direction indicators – left/right
Displays the temperature of the engine
cooling system. If the temperature is abnor-
mally high and the needle enters the red
zone, a message is shown in the display.
Bear in mind that extra lamps in front of the air
intake reduce the cooling capacity at high
outside temperature and high engine loads.
2. Display
The display shows information and warning
messages.
3. Speedometer
Shows the speed of the car.
4. Trip odometer, T1 and T2
7. Main beam, On/Off
8. Warning symbol
If a fault arises, the symbol lights up and a
message is shown in the display.
9. Tachometer
Indicates engine speed in thousands of
revolutions per minute (RPM). Do not allow
the needle of the tachometer to enter the red
field.
10. Automatic gearbox indicator
The selected gearshift programme is
displayed here.
The trip odometers are used for measuring
short distances. The right-hand digit displays
tenths of a kilometre. Press the button for
more than 2 seconds to reset. Change
PU
English 
