Instruments and controls
Lighting panel
Front and rear position/parking
lamps.
LED in the button is lit while the fog lamps are
on.
^
_
`
NOTE! In some countries, dipped beam may
not be used in combination with front fog
lamps.
Ignition key in position 0: All lighting
off.
Ignition key in position II:
Headlamps light (plus front and rear parking
lamps, number plate lighting and instrument
illumination).
E – Rear fog lamp
Ignition key in position II. Press the button.
The rear fog lamp lights in combination with
the main/dipped beam. The LED in the button
and the symbol in the combined instrument
panel light at the same time.
NOTE! You must always turn the light switch
to this position to switch on the main beam.
B – Headlamp levelling
a
b
Please remember: Regulations for use of
front and rear fog lamps vary from country to
country.
To allow for headlamp beam adjustment to
compensate for different loads, certain cars
come equipped with an actuator motor for
each headlamp. Adjust the headlamps using
the headlamp levelling control on the
dashboard.
A – Headlamps and position/
parking lamps
All lighting off.
Cars with daytime running lights
(certain countries)
Cars with Bi-Xenon lighting (option) do not
have control B because headlamp levelling is
automatic.
Ignition key in position II: Dipped beam on
(plus front and rear parking lamps, number
plate lighting and instrument illumination).
Dipped beam lights automatically when the
ignition key is switched to the driving position
and cannot be switched off. Before trips to
certain countries, your Volvo workshop can
help you deactivate the daytime running
lights.
C – Instrument lighting
Control upwards: brighter illumination.
Control downwards: dimmer illumination.
D – Front fog lamps
Ignition key in position II. Press the button.
The fog lamps light in combination with the
parking lamps and main/dipped beam. The
QS
English 
