Instruments and controls
Power windows
The power windows are operated using the
controls in the door armrests. The ignition key
must be in position I or II for the power
windows to work. Once you finish driving and
remove the ignition key, the windows can still
be opened or closed as long as neither of the
front doors has been opened.
^
_
Open a window by depressing the front of
the control, and close it by pulling up the front
of the control.
WARNING!
If there are children in the car:
Controls (B) to operate windows in the rear
doors.
• Remember to switch off the supply to
the power windows by removing the
ignition key if the driver leaves the car.
Power windows in the front
doors
Windows can be opened or closed from the
Blocking power windows in the
rear doors
• Make sure that children’s and other
passengers’ hands are clear when
closing the windows.
If the rear door windows are operated
from the driver’s door:
• Check that none of the rear seat
passengers are in danger of getting their
hands caught when closing the windows.
The power windows in the rear seat can be
blocked with the switch on the driver’s door
control panel. Always remember to switch off
current to the power windows (i.e. remove
the ignition key) if you leave children in the car
unattended.
front seat two ways.
– Press the control (A) slightly down or pull
it slightly up. The power windows go up
or down as long as the switch is actuated.
– Press the control (A) all the way down or
pull it all the way up, and then release.
The windows then open or close automat-
ically. Movement is stopped if the window
is blocked in any way.
LED in the switch is unlit
The rear door windows can be operated both
with the control on each rear door and with
the controls on the driver’s door.
NOTE! The function auto up for the
passenger side is only available in certain
markets.
LED in the switch is lit
The rear door windows can only be operated
from the driver’s door.
RR
English 
