4.5 Information and infotainment system
4.5.1 Reversing camera
Aftermarket reversing camera – direct connection to SYNC*
Information
–
The display does not have a direct input for
connecting devices such as cameras. Only vehicles
with *SYNC radio support retrofitting of a reversing
camera.
–
–
–
–
–
The SYNC module has three pins:
C1-14: input camera – rear parking aid video (+).
C1-15: input camera – rear parking aid video (-)
C1-33: earth: rear parking aid camera video
The cable between the reversing camera and the SYNC
module must be shielded and twisted, preferably in
one piece to minimise signal loss.
–
–
In addition, certain parameters of the vehicle must be
reconfigured. This must be done at an authorised
Volkswagen Commercial Vehicles partner or importer
in order not to void the guarantee.
The display only provides information on the reversing
camera when reverse gear is engaged.
Rear brake assist system
Information
–
Do not paint or modify the reversing camera or the
rear bumper as this will affect the function of the rear
brake assist system.
–
–
The reversing brake assist system does not support
modifications to the power steering system.
The reversing brake assist system does not support
modifications to the traction control system or anti-
lock brake system.
–
–
Modifications to the door locking system or removal
of doors may interfere with reversing brake assist
system.
Installing accessories on the rear of the vehicle will
interfere with the functions of the reversing brake
assist system. In these cases, the function should not
be used. Incorrect reversing brake assist events may
occur.
–
Do not cover the reversing camera.
Volkswagen Commercial Vehicles – Body builder guidelines – February 2023 edition
The new Amarok – Page 92 of 166
English 
