Phone interface basic configuration.
Convenience phone interface.
Phone interface basic configuration
The phone interface uses the HFP Bluetooth profile for transmission. This enables the use of phone functions via the Infotainment system and played back via the
vehicle speakers.
Convenience phone interface
Just like the basic configuration of the phone interface, the Convenience phone interface uses the HFP Bluetooth profile.
The Convenience phone interface can be equipped with the wireless charging function ⇒ Wireless charging function.
In order to use the features of the wireless charging function, you need to place a suitable cell phone correctly in the storage compartment. Depending on the
vehicle equipment, this will connect the cell phone to the vehicle antenna. This improves reception and call quality.
Wireless charging function
Refer to ⇒
and Safety instructions.
Fig. 158 Diagram: storage compartment with a liner pad for wireless charging.
The wireless charging function depends on the vehicle equipment and is not available in all countries.
Depending on the vehicle, the rear shelf with liner mat fig. 158 for the wireless charging function is located in the center console or between the front seats in a
storage compartment.
In some vehicles, the liner mat bears a phone symbol, which indicates the center position for the wireless charging function fig. 158. The symbol on the liner mat
may look different in some vehicles.
The wireless charging function uses electromagnetic induction to transfer energy wirelessly over short distances.
The maximum charging power is 5 watts.
The Qi standard allows suitable Qi-capable cell phones to be charged wirelessly.
To find out whether a cell phone supports the Qi standard, see the cell phone operating instructions. The manufacturer of the cell phone can offer further information
regarding compatibility.
Only a single Qi-capable cell phone without a protective case and with maximum dimensions (width x length) of approximately 3 in x 6 in (80 mm x 140 mm) should
ever be placed flat on the wireless charging function shelf.
Qi-capable cell phones with larger dimensions cannot be charged wirelessly.
Before charging, remove any foreign objects with metal components, such as coins, from the storage compartment and follow the cell phone operating instructions.
To charge a Qi-capable cell phone, place a suitable cell phone, without a protective case and with the display and the entire surface facing up, flat in the center of th
shelf. The charging process starts automatically.
The Infotainment system installed at the factory informs you when the charging process is starting and, if necessary, if there are any foreign objects with metal
components in the storage compartment. Remove foreign objects immediately.
If a cell phone is not placed on the shelf correctly or if it is too large, it may not be detected correctly or detected at all. The Infotainment system may notify you of a
foreign object in the storage compartment. If a suitable cell phone is used and its position is corrected, the fault may be eliminated.
Storage compartment cover
Depending on the vehicle equipment and in some countries, the storage compartment for the wireless charging function may have a cover for the cell phone displa
Only a cell phone with maximum dimensions (width x length) of approximately 3 in x 6 in (80 mm x 140 mm), in accordance with the specifications, may be placed i
the covered storage compartment.
259
English 
