Get Digital Instrument cluster -> Service Guide for Volkswagen Atlas SUV Second Generation (2024-2025)

Since start memory

If the trip is interrupted for more than two hours, the memory is erased.

Since refuel memory

Display and memory of the collective driving and consumption data. The memory is erased when the vehicle is refueled.

Extended period memory

The memory stores driving statistics for up to 100 minutes of travel time or a driving distance of 9999.9 km (mi). If one of thes

maximum thresholds is met, the memory is erased. The maximum thresholds may vary depending on the version of the

instrument cluster.

Reset driving data menus

1. Press the

button.

2. Select the corresponding driving data menu in the conﬁguration menu with the

An arrow behind the entry in the conﬁguration menu indicates a submenu.

and

arrow buttons.

3. In the submenu, select Reset data and conﬁrm by pressing the

button.

Resetting the trip odometer

1. Tap the Vehicle function key in the Infotainment system.

2. In the Vehicle menu, tap the Status function key.

3. Tap the Distance driven function key.

4. Tap the 0.0 function key to reset the value.

WARNING

If the driver is distracted while driving, accidents and serious injuries can occur. Operating the Volkswagen Digital Cockpit

and Infotainment system can distract you from trafﬁc.

Always drive attentively and responsibly.

Never operate the instrument cluster while driving.

Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.

Service

Service menu

Depending on the equipment, settings can be applied in the service menu.

Opening the Service Menu

1. Open the Travel time/distance information proﬁle in the secondary displays.

2. Press and hold the

3. Use the and

button on the multi-function steering wheel for approximately six seconds.

arrow buttons to navigate the menu.

Opening the service interval status

1. Open the Service menu.

An overview of the remaining distance and days until the next inspection service or the next oil change service is shown in

the instrument cluster display.

Resetting the service interval display

1. Open the Service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the oil change service

1. Open the Reset oil change service menu.

2. Follow the instructions in the instrument cluster display.

Displaying the Engine Code (EC)

1. Open the Engine code menu.

The engine code is shown on the instrument cluster display.

Setting the time

1. Open the Time menu.

2. Set the time with the

and

arrow buttons.

Displaying copyright information

1. Open the Copyright menu to access the copyright information.

Service interval display

Displays about service events appear in the Volkswagen Digital Cockpit and in the Infotainment system. There are different

versions of the Volkswagen Digital Cockpit and Infotainment system; therefore, the appearances of the displays may vary.

Service appointments at Volkswagen are divided into oil change services and inspections. The service interval display informs

the driver about the next service appointment which includes an engine oil change and about the next inspection.

The service intervals are speciﬁed for vehicles with the ﬁxed oil change service interval.

Intervals are determined individually on vehicles with the ﬂexible oil change service interval. Oil change services only need to

be performed if the vehicle requires it. The speciﬁc operating conditions and the personal driving style are also taken into

consideration. The service early warning message is ﬁrst displayed 30 days prior to the calculated oil change service due

date. The displayed remaining distance to be traveled is always rounded to 100 km (miles) and the remaining time is rounded

to whole days.

Service notiﬁcation

If an oil change service or an inspection service is due in the near future, a service notiﬁcation will be displayed when the

ignition is switched on.

The speciﬁed mileage or time is the distance or time until the next service can be completed.

Service event

When an oil change service or an inspection service is due, a chime will sound when switching on the ignition and you can

then see a wrench symbol

for a few seconds in the instrument cluster display together with one of the following displays:

Please have an inspection service performed.

Oil change service due!

Oil change service and inspection service due!

Checking a service due date

When the ignition is on, the engine is off and the vehicle is stationary, the current service due date can be checked:

1. Tap the Vehicle function key.

2. Open the Status menu and tap the Service function key to display the service information.

The service due date can also be checked via the service menu ⇒ Service menu.

Resetting the service interval display

If the service interval display was not reset after the oil change service or inspection service, the display can be reset as

follows:

The service interval display can only be reset through the service menu ⇒ Service menu.

Do not reset the service interval display between service intervals or incorrect information will be displayed.

If the oil change service interval was manually reset, the service interval display then also switches to a ﬁxed service interval,

even on vehicles with the ﬂexible oil change service interval.

The service message disappears automatically after a few seconds when the engine is running or when the

on the multi-function steering wheel is pressed.

button

If the 12 V vehicle battery in a vehicle with the flexible oil change service interval has been disconnected for an extended

period, the time for the next oil change service cannot be calculated. Therefore, the service interval displays may show

incorrect calculations. If this is the case, follow the maximum permissible service intervals.

Displaying Vehicle identiﬁcation number

1. Tap the Vehicle function key in the Infotainment system.

2. In the Vehicle menu, tap the Status function key.

3. To display the vehicle identiﬁcation number (VIN), tap the Service function key.

The vehicle identiﬁcation number (VIN) is displayed.

Time and date

Setting the time and date in the Infotainment system

1. Tap the Settings function key ⇒ Vehicle settings menu.

2. Select the Time and date menu to set the time and date.

3. Select time source:

Automatic.

Manual.

The time and date are only displayed in the Infotainment system.

Setting the time in the Volkswagen Digital Cockpit

1. Open the service menu ⇒ Service menu.

2. Open the Time menu.

3. Set the time with the

and

arrow buttons.

Exit menu

You can adjust the settings of some

functions in the exit menu before

leaving the vehicle. The exit menu will

be displayed in the Infotainment

system when you switch off the

ignition.

The entries shown depend on the vehicle equipment and may only be available under certain conditions.

Digital Instrument cluster -> Service for Your Volkswagen Atlas SUV Second Generation (2024-2025)

Related Topics

Digital Instrument cluster

Popular Owner Manuals

Latest Owner Manuals