Digital Instrument cluster -> Vehicle settings menu for Your Volkswagen Atlas SUV Second Generation (2024-2025)

Hide  
The exit menu is automatically hidden when you leave the vehicle.  
1. To hide the exit menu manually, tap  
.
The exit menu can be opened again by switching on the ignition and switching it off again immediately.  
Settings  
You can select the entries individually and arrange their order.  
1. Tap  
.
2. Select the entries as desired and rearrange their order if necessary.  
3. Tap  
again.  
Vehicle settings menu  
You can switch individual functions  
and systems on and off and adjust  
settings in the vehicle settings menu in  
the Infotainment system.  
General information for operation  
The activated functions are highlighted in color.  
Opening the Vehicle settings Menu  
1. Switch the ignition on.  
2. If necessary, switch on the Infotainment system.  
3. Tap the Vehicle function key.  
4. Depending on the equipment: Tap the Vehicle menu item and choose between the Interior and Exterior function keys.  
Or: select the  
menu item.  
5. Open the preferred item from the submenus and set as desired.  
6. To return to the home screen, tap the home button  
System settings and vehicle information display  
.
Depending on the version, information can be displayed or settings set in the Vehicle settings menu:  
Depending on the vehicle equipment: 3D vehicle view (Interior or Exterior).  
Depending on vehicle equipment: Performance monitor.  
Depending on vehicle equipment: Lap timer.  
Driving Data.  
Vehicle status.  
After starting the engine when the 12 V vehicle battery is severely drained or has been replaced or jump-started, system  
settings, e.g. personal convenience settings and programming, may be adjusted or deleted. Check and correct the settings  
after the 12 V vehicle battery is sufficiently recharged.  
WARNING  
Operating the Infotainment system can distract you from traffic. If the driver is distracted, accidents and serious or fatal  
injuries can occur.  
34  
Always drive attentively and responsibly.  
Adjust settings in the Infotainment system only when the vehicle is stationary.  
Dynamic Road Sign Display  
Introduction  
The Dynamic Road Sign Display  
detects standard road signs using a  
camera in the interior rearview mirror  
base and informs the driver of detected  
speed limits and passing restrictions.  
Within the system limits, the system  
also displays an additional sign to  
indicate special restrictions. The  
system may also continue to display  
the valid speed limit on roads without  
signs.  
The traffic signs recorded by the Dynamic Road Sign Display are shown in the display of the Volkswagen Digital Cockpit.  
Depending on the Infotainment system installed in the vehicle, the road signs may also be displayed there.  
Depending on the vehicle equipment, a display may also appear in the head-up display (HUD).  
Dynamic Road Sign Display is always active when the ignition is started.  
Road sign display  
Fig. 13 In the instrument cluster display: recognized speed limits (general example).  
After checking and evaluating the information from the camera, the Infotainment system, and the current vehicle data, the  
Dynamic Road Sign Display function displays up to two valid traffic signs and a generic additional sign fig. 13:  
1st position: The road sign that is currently valid is shown on the left-hand side of the display, for example a speed limit of  
20 mph (approx. 35 km/h).  
2nd position: Another road sign can be displayed in the second position, such as a passing restriction.  
Additional signs: A recognized additional sign is displayed above the applicable traffic sign. Depending on the system, a  
generic additional sign is displayed instead of the actually recognized additional sign. The applicable traffic sign in  
the display of the instrument cluster is supplemented by the generic additional sign.  
WARNING  
The Dynamic Road Sign Display is not a replacement for the driver's attention and works only within the system  
limitations. This means that the Dynamic Road Sign Display cannot detect all road signs and may not react, or may react  
35