Adjusting the height (second row of seats)
—Move the head restraint up or down. You can use the smooth lugs to adjust the height of each headrest.
The head restraint must click securely into position.
Adjusting the height (third row of seats)
—Move the head restraint all the way up or down.
—The head restraint will only click into place in the uppermost position.
1
—To release the head restraint from the locked position, press the→ Fig. 2
button and lower the head restraint.
Removing and fitting head restraints in the first row of seats
Fig. 1 First row of seats: Removing the head restraint
The head restraints are specifically designed for the respective row of seats. They must not be installed in another
row of seats.
Removing the head restraint
—Lower the head restraint if necessary (→ Head restraints).
—To unlock the head restraint, feel for the recess in the marked area on the rear of the backrest and use a finger to
1
press it in the direction of the arrow → Fig. 1
.
—For seats with a stowage area in the backrest, press the recess by pushing a long object through the hole in the
upper part under the rubber strap on the stowage area →
.
2
—Pull the head restraint out fully in the direction of the arrow
.
Fitting the head restraint
—Position the head restraint correctly over the head restraint guides and then insert into the guides of the
corresponding seat backrest.
—Slide the head restraint all the way down until the guide pins click into place.
—Adjust the head restraint so a correct sitting position can be assumed.
NOTICE
Sharp objects can damage the seat cushion and scratch the stowage area in the backrest.
139
English 