Wheels and Tyres -> Contents of the breakdown set for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

WARNING  
Using the breakdown set can be dangerous, especially if the tyre is inflated at the roadside. Please note the  
following steps in order to reduce the risk of serious injuries:  
Stop the vehicle as soon as possible and when safe to do so. Park the vehicle at a safe distance from moving  
traffic in order to fill the tyre (→ In an emergency).  
Make sure that the ground is flat and firm.  
All passengers, and children in particular, must be at a safe distance and away from your area of work.  
Switch on the hazard warning lights to warn other road users.  
The breakdown set should be used only if you feel confident with carrying out the procedure. If not, seek expert  
assistance.  
Tyres repaired with the breakdown set are intended for temporary, emergency use only. They should only be used  
until you can reach the nearest qualified workshop.  
Tyres that have been repaired using the breakdown set should be replaced as soon as possible.  
Sealant is hazardous to health and must be washed off immediately if it gets onto the skin.  
The breakdown set must be stored out of the reach of children.  
Never use a vehicle jack, even if it is approved for the vehicle.  
WARNING  
Tyres that have been filled with sealant will not handle in the same way as a standard tyre.  
Never drive faster than 80 km/h(50 mph).  
Avoid full acceleration, sudden braking and fast driving through bends in the road.  
Drive for just 10 minutes at no more than 80 km/h(50 mph) and then check the tyre.  
Dispose of used or out-of-date sealant in accordance with legal  
requirements.  
You can get a new tyre filler bottle from a Volkswagen Commercial Vehicles  
dealership.  
Observe the separate instructions from the manufacturer of the breakdown  
set.  
Contents of the breakdown set  
Fig. 1 Diagram: Components in the breakdown set.  
The breakdown set consists of the following components:  
1
Sticker with the maximum permitted speed “max. 80 km/h” or “max. 50 mph”.  
532  
2
3
4
5
Filler hose with plug.  
Tyre filler bottle.  
Spare valve core.  
Valve core extractor.  
5
There is a slot on the lower end of thevalve core extractor → Fig. 1  
for the valve core. This is required for  
4
extracting and fitting the tyre valve core. This also applies to the spare valve core  
.
Fig. 2 Diagram: Compressor in the breakdown set.  
The compressor in the breakdown set consists of the following components:  
1
2
3
4
5
6
12-volt plug.  
ON/OFF switch.  
Tyre pressure display.  
Air release button or air bleed screw.  
Tyre filler hose.  
Air compressor.  
The air compressor from the breakdown set may be operated from the 12-volt socket, even if the power  
stated on the type plate of the air compressor exceeds the maximum power of the socket.  
533