1. Note the tyre direction of rotation (→ Tyre lettering and tyre type).
2. Put the wheel in place.
3. Screw the anti-theft wheel bolt with the adapter clockwise to the correct position (→ Wheel bolts) and tighten
slightly.
4. Screw in all the other wheel bolts in a clockwise direction and tighten themgently.
5. Lower the vehicle with the jack.
6. Use the box spanner to tighten all the wheel bolts securely in a clockwise direction→ . Do not tighten the
bolts in clockwise or anticlockwise sequence. Tighten them in diagonal sequence.
7. Fit the caps, wheel centre trim or wheel cover .
After changing a wheel
1. Clean the vehicle tools and stow them safely in the vehicle.
2. Stow the changed wheel securely in the spare wheel bracket (→ Spare wheel or temporary spare wheel).
3. Have the tightening torque of the wheel bolts checked immediately (→ Wheel bolts).
4. The damaged wheel should be replaced as soon as possible.
WARNING
Incorrect torque or incorrect use of wheel bolts can lead to a loss of control of the vehicle, cause accidents and
serious injuries.
● Always keep all wheel bolts and threads in the wheel hubs clean and free from oil and grease. The wheel bolts
must be easy to turn and be tightened to the specified torque.
After changing a wheel, the indicator lamp for the tyre monitoring system may indicate a fault in the system
.
Introduction
You can use the breakdown set to temporarily seal a tyre securely if it has been damaged by a foreign body or a
puncture (up to 4 mm (5/32 in) in diameter).Do not remove foreign objects(e.g. screws or nails) from the tyre!
Once the sealant has been added to the tyre, the tyre pressure must be checked and adjusted again after
approximately 10 minutes of driving.
Seek expert assistance if more than one vehicle tyre is damaged. The breakdown set is only designed to fill one tyre.
Only use the breakdown set when the vehicle has been safely parked and you are familiar with the work and safety
precautions needed. Seek expert assistance if this is not the case.
The tyre sealant must not be used in the following situations:
—If the rim is damaged.
—If the outside temperature is below -20°C(-4°F).
—If there are cuts or punctures in the tyre that are larger than 4 mm(5/32 in).
—If the vehicle was driven with very low tyre pressure or a flat tyre.
—If the use-by date on the tyre filler bottle has expired.
—If a foreign object has been removed from the tyre.
—In connection with mobility tyres. The word “Seal” is on the outer wall of the tyre if your vehicle is fitted with
mobility tyres.
531
English 
