Get Navigation -> Introduction Guide for Volkswagen ID.7 4 Door First Generation (2023-2025)

Bluetooth: select a device connected via Bluetooth as the media source.

Symbols for categories and groups of media files

Music tracks.

Videos.

Playlists.

Albums.

Artists.

Genres.

Podcasts.

Audio books.

Symbols for video playback

Play video in full-screen mode.

Minimise playback.

Introduction to the topic

The current vehicle position is determined by means of a global satellite system. To enable optimal navigation to the

destination, all readings and possible traffic information are compared with the available map material.

Acoustic navigation announcements and visual guidance direct the driver to the destination.

Depending on the country, some Infotainment system functions can no longer be selected when the vehicle is

travelling above a certain speed. This is not a malfunction, but simply a legal requirement.

WARNING

If settings, destination inputs and changes for the navigation system are made while the vehicle is in motion, this

can distract the driver and cause accidents and injuries.

● Drive with your full attention and with responsibility.

● Configure the settings and enter destinations and changes for the navigation only when the vehicle is stationary.

The navigation may recalculate the route if the driver misses a

turning.

The quality of the navigation recommendations depends on the navigation data available and any reported

traffic jams.

Depending on the country, activate “Online mode” and “Send location data” in the privacy settings before

using the online functions and mobile online services of the navigation system (→ Privacy settings).

The corresponding VW Connect service must be activated in order to use the online functions and mobile

online services, e.g. traffic information.

390

Restrictions during navigation

When the Infotainment system cannot receive any data fromGPS

satellites, e.g. in a tunnel, navigation can still continue using the vehicle sensors.

In areas that are not or are not completely included in the Infotainment memory, the Infotainment system will also

try to enable route guidance.

If navigation data is unavailable or incomplete, the navigation system may be unable to determine the exact vehicle

position. As a result, the navigation may not be as exact as usual.

Road navigation is subject to continuous changes, e.g. new roads, road works, road closures, changes in the road

names and house numbers. In the case of obsolete navigation data, there may be errors or inaccuracies during

navigation.

Function descriptions

Navigation announcements

Navigation announcements are acoustic driving instructions for the current route.

The type and frequency of navigation announcements depends on the driving situation, e.g. start of route guidance,

driving on a motorway or in a roundabout.

A navigation announcement informing you that you have reached the destination area is given if the exact destination

cannot be reached, e.g. because it is located in a non-digitised area. In addition, information on the direction and

distance to the destination are displayed on the screen.

During dynamic route guidance, you receive information about reported traffic jams on the route. An additional

navigation announcement is given if the route is recalculated due to a traffic disruption or changed driving style.

The volume of a navigation announcement can be adjusted or muted during output of the announcement. All other

navigation announcements are given with this volume setting or are muted.

Navigation announcements are not given if the Infotainment system has been

muted.

Adapting the navigation map

For optimal viewing, you can also adapt the navigation map and map view with advanced finger gestures.

Moving the navigation map

Recommendation: use your index finger.

1. Use your finger to move the navigation map.

Enlarging or reducing the map view

Recommendation: use your index finger.

1. Tap the map twice in succession and keep your finger on the screen.

2. Move your finger upwards to zoom out from the map view. Move your finger downwards to zoom in on the map

view.

Enlarging or reducing the map view

Recommendation: use thumb and index finger.

1. Using two fingers at the same time, tap the map and keep your fingers on the screen.

2. Move your fingers together to zoom out from the map view. Move your fingers apart to zoom in on the map

view.

391

Tilting the map view

Recommendation: use your index and middle finger.

1. Using two fingers that are horizontal to each other at the same time, tap the map and keep your fingers on the

screen.

2. Move your fingers upwards to tilt the map view forwards. Move your fingers downwards to tilt the map view

backwards.

Rotating the map view

Recommendation: use thumb and index finger.

1. Using two fingers at the same time, tap the map and keep your fingers on the screen.

2. Turn your fingers clockwise or anticlockwise to rotate the map view.

Route plan

Several destinations can be defined one after another in the route plan. The starting point is always the vehicle

position determined by the Infotainment system. The route plan contains information on relevant events, such as

stopovers and suggested destinations, if navigation data is available.

When you tap an event, an additional window opens with further options. The options available depend on the event

and the current settings.

Opening and closing the route plan

1. Tap the route plan to open the route plan.

2. Tap to close the route plan.

3. To stop route guidance to the destination or stopover, tap next to the destination in the route plan.

Editing route guidance

To edit route guidance, move the stopovers or the destination to the route plan.

1. Tap and hold the desired destination until it is visibly highlighted.

2. Move the destination to the desired position and release.

The route will be recalculated.

Additional window on the route plan

If you tap the entries of the route plan, an extra window with additional options can appear. The possible options

depend on the entry tapped.

Functions in the additional window:

Display on map

Display the selection on the map.

Direct route

Start direct route guidance.

Add stopover

Add a stopover to the route guidance.

Delete

Delete stopover from route guidance.

392

Bypass

Avoid a traffic disruption. The route will be recalculated.

Stop route guidance

End the current route guidance.

Closing the additional window on the route plan

1. Tap a free area outside the additional window.

Setting preferred POI categories

The system offers various POIs, e.g. filling stations, as quick selection symbols in destination input, in the route plan

and on the map. You can prioritise display of these symbols under

preferred POI categories.

Basic functions Define

Stored data

The Infotainment system stores certain data, e.g. frequently driven routes, so that you can enter destinations quickly

and enjoy the most efficient route guidance.

Deleting stored data

1. Tap

Basic functions Delete usage pattern.

2. Tap confirmation to delete.

Learning usage patterns

While travelling, the navigation saves the routes travelled and destinations arrived at in order to create suggested

destinations automatically. Destinations are learned depending on the time of day and the day of the week.

The navigation system can suggest learned routes. Route guidance begins when one of the suggested routes is

selected.

The route guidance follows the selected route until the vehicle deviates from it. The route is recalculated and will

guide you back to the selected route via a direct alternative.

Relevant traffic disruptions are taken into account in the route guidance. Relevant traffic disruptions will be avoided

if an alternative route and the navigation data is available.

If you drive an already learned route when route guidance is inactive, the destination will be transferred to the route

plan. It is not necessary to actively start route guidance to the learned destination. Warnings may be given about

traffic disruptions and a forecast arrival time will be displayed.

You can activate or deactivate the function at any time and also delete the stored data for the function.

Activating or deactivating “Learn usage pattern”

1. Tap

Basic functions to open the settings for this function.

2. Tap Learn usage pattern.

Displaying suggested routes

1. Tap

Suggested.

Deleting stored data for “Learn usage pattern” function

1. Tap

Basic functions to open the settings for this function.

393

2. Tap Delete usage pattern.

Navigation functions and symbols

Navigation

The navigation functions and symbols depend on the equipment and are not available in all countries.

Functions

—Destination input and route calculation.

—Personal POIs.

—3D City Maps.

—Online Map Update.

—Online Traffic Information.

—360° range display.

General navigation symbols

1. To open the main menu, tap

Enter and search for destinations.

(→ Infotainment system overview).

Display the navigation map.

Open saved addresses (contact list of the connected mobile telephone).

Open the settings.

You can find settings for the navigation announcements here, for example.

Map symbols

The function buttons and displays depend on the settings and the current driving situation.

The map displays symbols for traffic information, e.g. traffic disruptions, andPOI

s, e.g. filling stations, when navigation data is available (→ Traffic information).

Display current position.

Align the map.

Map scale.

Display information on the route.

Fully automatic map mode(alignment in direction of travel, position, zoom and tilt).

Display route overview and alternative routes for current route guidance when route guidance is active.

Display route options with active route guidance.

394

Route plan symbols

Display current position.

Destination of the current route guidance.

Add a destination as a stopover or start direct route guidance to the destination.

Save destination as a favourite.

Close the route plan.

Forecast distance to the destination.

Forecast time of arrival at the destination.

Forecast time needed to reach the destination.

Other symbols

Destination search: detailed destination input for an address.

Save as favourite.

Work (company).

Home (private).

Charging station symbols

E-charging stations, also referred to just as “charging stations” below, are displayed on the map when navigation

data is available.

Tap the required charging station to start route guidance .

Open search for charging stations.

Open filter/preference settings for displaying charging stations on the map.

The symbol changes when a filter is active.

Charging station on the map.

Number of planned charging stops on the complete route.

Charging time at the charging station.

Current availability of the charging station.

Red status: charging station is occupied or out of order.

Green status: charging station is free and available.

Status of the high-voltage battery.

395

Traffic disruptions

Traffic disruptions are displayed on the map when navigation data is available (→ Traffic information).

Tap a traffic disruption to open an additional window showing details (→ Navigation).

Traffic information not available.

Traffic jam.

Accident.

Ice.

Road closed.

Risk of skidding.

Danger.

Road works.

Strong winds.

Entering a destination and starting route guidance

Depending on the vehicle equipment, different functions are available for destination input. Certain functions are

available only in some countries.

You can more precisely limit the search by indicating preferences in the results list, such as “nearby”.

Further information about the symbols on the Infotainment system display can be found in this owner’s manual

(→ Navigation).

Entering an address

Start route guidance by entering an address. The navigation system will suggest known destinations during input.

You can also enter a new, as yet unknown address for route guidance.

When entering the address, enter the name of the destination rather than the

postcode.

Selecting a destination and starting navigation

1. Tap

.

Or: tap

.

2. Enter the address of the destination and select the desired destination.

3. Tap Start.

Or: tap

.

Quick start

1. Tap

.

2. Enter the address of the destination and tap and hold the desired destination for a few seconds.

396

Enter the destination as accurately as possible. If you make a mistake when entering the destination, route guidance

will not be possible or you may be navigated to the wrong destination.

Recommended destinations

The navigation system uses stored data such as the last and learned destinations, favourites, and home and work

addresses so it can use this data for route guidance.

Selecting a destination and starting navigation

1. Tap

Suggested.

2. Tap the desired destination.

Route guidance starts automatically.

Last destinations

The navigation system stores up to 25 destinations that you have driven to last in order to make them available for

route guidance. A new destination automatically overwrites the oldest destination.

Selecting a destination and starting navigation

1. Tap

Last destinations.

2. Tap the desired destination.

3. Tap Start.

Or: tap

.

Quick start

1. Tap

Last destinations.

2. Tap the desired destination and hold for a few seconds.

Favourite destinations

Save up to 50 destinations as favourites.

Saving a destination as a favourite

1. When entering a destination, tap in the additional window.

Selecting a destination and starting navigation

1. Tap

Favourites.

2. Tap the desired destination.

3. Tap Start.

Or: tap

.

Quick start

1. Tap

Favourites.

2. Tap the desired destination and hold for a few seconds.

Adjusting the 360° range display and Electric Vehicle Route Planner

397

Selecting on the map

The navigation map contains active areas at many locations which are suitable for destination input. To enter a

destination, tap the desired position or location on the map. You can start route guidance if map data is available at

this location.

Destination input via the navigation map depends on the data status and is not possible for all positions.

Use the off-road navigation function to enter a destination point with unknown data.

Off-road navigation

The off-road navigation function calculates routes to selected destination points with unknown data. If a destination

point is not on known roads or there is no positioning data available for this point, the navigation system will

calculate the route up to the nearest point on the known roads and then complete the route up to the destination

point by a direct connection.

To start off-road navigation, tap a free area without positioning data.

Starting navigation

1. Tap

.

2. Move the map view until the desired position can be selected. The navigation map can be operated by extended

tap gestures (→ Navigation).

3. Tap the desired destination or any destination point on the map without positioning data.

4. Tap Start.

Or: tap

.

Using the address data of a contact

Start navigation using the stored address data of a contact. Stored contacts without address data cannot be used for

route guidance.

Starting navigation

1. Tap

.

2. Tap the desired contact and address data.

3. Tap Start.

Or: tap

.

NOTICE

If the address data of a contact is out-of-date, navigation will still be performed to the stored address. Make sure

that the address of the contact is up-to-date.

360° range display

The 360° range display shows the possible range with the current charge level of the high-voltage battery. The

display shows only an estimated range calculated on the basis of the current consumption figures. The display may

change during the journey, and the figures shown in the margins must also be taken as an estimate.

Activating or deactivating the 360° range display

1. Tap and activate

Show range on map.

398

Navigation -> Introduction for Your Volkswagen ID.7 4 Door First Generation (2023-2025)

Related Topics

Navigation

Popular Owner Manuals

Latest Owner Manuals