Navigation -> Navigation data for Your Volkswagen ID.7 4 Door First Generation (2023-2025)

6. Tap an alternative charging station nearby on the map or in the list.  
Details of the alternative charging station are displayed.  
7. Tap Add as stopover.  
The previously planned charging station will be replaced by the newly selected charging station and the route  
adjusted accordingly.  
If you select Add as stopover, the selected charging station will be kept if the route is  
changed.  
Search for charging stations using filter  
You can set various criteria when searching for charging stations on the map and in the search results for the  
“Charging station” category. Setting these criteria affects the map display. Only charging stations that meet the  
criteria will be displayed. The search results in the “Charging station” category are filtered according to the selected  
criteria. You can change the criteria again at any time. An active filter does not have any influence on route planning.  
Adapt the settings if you want to take charging stops into account in route planning → Adjusting the 360° range  
display and Electric Vehicle Route Planner.  
Filtering charging stations  
1. Tap  
.
2. Select a criterion, e.g. payment method.  
The symbol changes when a filter is  
active.  
Navigation data  
The Infotainment system has an internal navigation data memory. Depending on the country, the required navigation  
data is already pre-installed.  
In order to carry out route guidance correctly and make full use of the functions offered, the Infotainment system  
always requires up-to-date navigation data.  
NOTICE  
If you use obsolete data, navigation may be impaired. Current routes cannot be determined or route guidance leads  
to the wrong destination.  
Always keep navigation data up-to-date.  
Online navigation data – expansion  
Regions in the navigation data that are not used by the user may be removed from the system under certain  
circumstances, for example if there is limited memory space in the navigation data memory. If these regions should  
be needed again at a later point in time, the navigation system will download them again on request. No VW Connect  
contract or VW Connect Plus contract is required for this. The service depends on the vehicle equipment and is  
available only in some countries.  
1. Switch on the ignition.  
2. Establish an internet connection, if this does not already exist.  
3. Depending on the country, also select “Online mode with location data” in the privacy settings (→ Privacy  
settings).  
Anyone who uses the vehicle as an anonymous guest must reset the privacy settings each time they start the  
vehicle (→ Privacy settings).  
400  
 
Updating navigation data manually  
Current navigation data for larger regions, e.g. Western Europe, can be downloaded from the internet at  
data medium available commercially. If you switch off the Infotainment system, installation will be interrupted and  
will automatically continue once the unit is switched on again.  
1. Download the navigation data and save on aUSB  
data medium.  
2. Switch on the vehicle ignition.  
3. Connect a USB  
data storage device to the Infotainment system when the vehicle is stationary.  
The navigation data for regions that are currently frequently travelled is automatically updated in the  
background.  
No message appears in the Infotainment system while the navigation data is being updated, or once the  
update is complete.  
When you update navigation data manually, theUSB  
data medium must remain continuously connected. No message appears to indicate that the update has been  
completed.  
Leave the USB  
data storage device connected to the Infotainment system for a few days until the navigation data for  
travelled regions has been completely downloaded and installed. Installation takes place automatically in the  
background while driving. Failure to do so will cancel the update.  
If you remove the data medium and travel through a new region in offline mode, the navigation data will not be  
updated, as there is neither a USB  
data storage device nor an internet connection.  
Displaying map data version  
1. Tap  
System information.  
Traffic information  
Depending on equipment, reception of traffic information is not available in all Infotainment systems and not in all  
countries.  
The Infotainment system automatically receives detailed traffic information when connected to the internet. This  
information is indicated by symbols and colouring of the road network on the map.  
Reception of traffic information depends on the privacy settings in some countries. No traffic information is  
received in offline mode .  
Traffic disruptions  
Traffic disruptions, e.g. traffic jams, are shown as symbols on the navigation map (→ Navigation).  
The route plan displays current traffic disruptions when navigation data is available.  
When route guidance is active, traffic disruptions that are on the current route are displayed in the route plan. You  
can bypass these traffic disruptions by editing the route plan.  
Bypassing a traffic disruption  
1. Tap the traffic disruption.  
2. Tap Bypass.  
401