Comfort drive Travel Assist -> Operating Travel Assist for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Take over steering immediately if a driver intervention prompt appears in the instrument cluster display or the  
deceleration by Travel Assist is not sufficient.  
Apply the brakes if the vehicle continues to roll unintentionally, e.g. after a driver intervention prompt.  
Operating Travel Assist  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
Fig. 119 Left side of the multi-function steering wheel (variant 1).  
234  
Fig. 120 Left side of the multi-function steering wheel (variant 2).  
Switching on and starting the regulation function  
1. During forward travel with ACC switched on, press the  
button on the multi-function steering wheel.  
The vehicle switches from ACC to Travel Assist.  
Depending on the driving situation, the vehicle switches to the following system status in Travel Assist:  
If ACC is regulating, Travel Assist maintains the current speed and the preset distance from the vehicle driving ahead  
(system status inactive).  
At the same time, the vehicle is kept in its lane by steering movements when road markings are detected (system status  
active).  
If ACC is not regulating, Travel Assist is switched on, but stays deactivated.  
1. Press the  
button.  
Travel Assist switches the driving situation accordingly to an active or inactive system status.  
The indicator/warning light corresponding to the driving situation comes on in the instrument cluster display.  
Canceling the regulation function  
1. Press the  
button briefly.  
Or: Press the brake pedal.  
The set distance remains saved.  
Changing to ACC  
1. Press the  
button on the multi-function steering wheel.  
The vehicle switches from Travel Assist to the system status of ACC corresponding to the driving situation.  
Adjusting further settings  
The further operation of Travel Assist corresponds to the operation of the ACC Adjusting the ACC settings.  
Troubleshooting  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Comfort drive Travel Assist is not available or is not working as expected  
The yellow indicator light turns on. In addition, a message is shown in the instrument cluster display.  
There is a malfunction in the sensor system. Check the causes and troubleshooting measures described in the  
information on ACC and Lane Assist.  
Malfunction or fault. Stop the engine and restart.  
The system limitations are not adhered to.  
If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Take over the steering  
The white indicator light will come on and a message will be shown on the instrument cluster display.  
You have let go of the steering wheel for a few seconds.  
1. Take hold of the steering wheel and take over steering the vehicle.  
235