Infotainment system -> Overview and controls for Your Volkswagen Multivan SUV Sixth Generation (2015-2024)

Overview and controls  
The Infotainment system is supplied in different versions. These differ with respect to the available functions,  
labelling and functions of the Infotainment buttons as well as the layout of the controls.  
Fig. 1 Overview: Display and control unit. The layout may vary depending on unit and country.  
1
2
3
4
5
6
7
8
Infotainment buttons (labelled).  
Rotary pushbutton  
Status bar.  
.
Screen.  
Function buttons (without label).  
Menu control.  
Microphone.  
SD  
card slot.  
USB  
9
port.  
1
Infotainment buttons (labelled)  
1. To access a function, press the relevant Infotainment button, e.g. RADIO for theRADIO main menu.  
Infotainment buttons are operated by lightly pressing them or by tapping and holding them.  
RADIO: Open the RADIO main menu. Switch to radio mode. In radio mode, switch frequency band and, depending  
on the equipment, switch memory level (→ Infotainment system overview) .  
365  
MEDIA: Open the MEDIA main menu. Switch to media mode and change the media source in media mode .  
CAR : Open the vehicle settings (→ Vehicle settings menu).  
PHONE: Open the PHONE main menu and telephone interface . If no mobile phone interface is installed, the  
currently active audio source will be muted.  
SOUND: Open the SOUND main menu andSound settings menu (→ Settings).  
SETTINGS : Open the settings menu of the active function (→ Settings).  
2
Rotary pushbutton  
To switch the Infotainment system on manually, briefly press the rotary/push button  
To adjust the Infotainment system volume, turn the rotary/push button .  
.
3
Status bar  
Displays the time and information about the operating status, e.g. the battery level of a connected mobile  
telephone.  
4
Screen  
For displaying information.  
Cleaning the screen (→ General information on Infotainment system).  
Opens the settings (→ Settings).  
5
Function buttons (without label)  
Six unlabelled function buttons are located under the screen . The current function of a function button varies  
depending on the current operating state. The function assigned to a function button is always shown on the screen,  
above the relevant button.  
1. Press the function button to perform the respective function.  
6
Menu control  
The menu control can be turned or pressed. The current function depends on the unit’s operating state.  
Turning the control allows you to browse lists or open lists of media tracks, for example.  
Pressing the control opens selected entries, applies settings, and starts or stops functions.  
7
Microphone  
For voice recording for the hands-free system.  
1. To activate the hands-free system .  
8
SD card slot  
Insert SD  
cards (→ Media drives).  
1. Carefully push the SD  
card into the SD card slot with the cut-off corner first, the label facing upwards, and the contacts facing down.  
9
USB port  
366