Advertisement

Advertisement

Volkswagen Information System -> Convenience submenu for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Settingsmenu  
Function  
Units  
Set the units in which temperature, fuel consumption, and distances should  
be displayed (for example, whether to show distance driven in miles or  
kilometers).  
Alt. speed dis.  
Service  
Activate/deactivate alternative speed display (mph or km/h).  
Display service messages or reset service interval display.  
Resets the functions in the Settingsmenu back to the factory settings.  
Factory setting  
Conveniencesubmenu  
Please first read and note the introductory information and heed the WARNINGS  
Convenience  
Function  
menu  
The horn beeps once when the vehicle is locked with the remote control  
vehicle key if ATA confirmis checked.  
ATA confirm  
Autounlock: You can enable or disable Auto unlock. If  
Auto unlock is enabled (box checked), the doors  
automatically unlock when you switch off the ignition and  
open a door from inside the vehicle. On vehicles with  
Auto unlock automatic transmission, the doors will also unlock when the  
selector lever is in Park (P) or the ignition is switched off.  
Auto unlock works only if the vehicle has been  
automatically locked after reaching a speed of 10 mph  
(15 km/h). Auto unlock always unlocks all the doors.  
Doors are unlocked as follows depending on the option  
selected:  
All doors: Pushing the unlock button on the remote  
Central locking  
control vehicle key (⇒ꢀfig. 32, ⇒ꢀfig. 35, ⇒ꢀfig. 34 or  
⇒ꢀfig. 33) unlocks all doors and the luggage compartment.  
Single door: Pushing the unlock button on the  
remote control vehicle key unlocks only the driver door. To  
unlock all doors and the luggage compartment, push the  
unlock button on the key a second time within about 5  
seconds.  
Unlock doors  
Vehicle side: Pushing the unlock button on the  
remote control vehicle key unlocks the doors on the driver  
side of the vehicle. On vehicles with Keyless Access,  
touching the sensor surface of a door handle on the side  
where the valid vehicle key is located unlocks the doors on  
that side of the vehicle .  
Manual unlocking/locking: No windows open or close when  
the key is held in the unlocking or locking position  
Window op.  
Off  
Keyless Access: No windows close when the locking  
sensor on the door handle is pressed and held  
(convenience closing)  
Convenience  
menu  
Function  
Manual unlocking/locking: All windows open or close when  
the key is held in the unlocking or locking position.  
Keyless Access: All windows close when the locking sensor  
on the door handle is pressed and held.  
All  
Manual unlocking: The driver window opens when the key  
is held in the unlocking position.  
Manual locking: All windows close when the key is held in  
the locking position.  
Keyless Access: All windows close when the locking sensor  
on the door handle is pressed and held.  
Driver  
Back  
The display switches back to the Conveniencemenu.  
Tilts passenger mirror down when backing up so you can see the curb  
Feature only available on vehicles equipped with memory seats.  
Mirror down  
Individually Both outside mirrors are adjusted separately.  
The front passenger outside mirror is adjusted at the same  
Both mirrors  
Mirror adjust  
time as the driver outside mirror.  
Back  
Factory setting The display switches back to the Conveniencemenu.  
Back  
The display switches back to the Settingsmenu.  
The display returns to the Conveniencemenu.  
Lights & Visionsubmenu  
Function  
Lights & Vision  
menu  
Coming Home  
Set how long the headlights and inside lights stay on after locking or  
unlocking the vehicle. Features can also be switched on or off  
Leaving Home  
Conv. turn sig.  
Enable / disable lane change flash (convenience turn signal). When the  
feature is enabled, the turn signal flashes at least 3 times when the turn  
signal is tapped  
Factory setting  
Back  
Resets the functions in the Lights & Visionsubmenu back to the  
factory settings.  
The display switches back to the Settingsmenu.