To display the distance driven on trips 1 and 2, select the Routeitem in the MFI menu (MFI>
Route). Press the OK button (⇒ꢀfig. 16) to toggle between Route 1 and Route 2 (trip 1 and trip 2).
Push and hold the OK button to manually reset a trip memory to zero.
The memory accumulates and stores information about distance driven and
fuel used from the time the ignition was switched on until the time it was
Single trip
memory
switched off.
1
2
If the ignition stays off for 2 hours or more, stored information is
automatically deleted. If the trip is continued within 2 hours after the ignition
was switched off, the new values are added.
The memory displays and stores the accumulated driving and fuel
consumption data of any number of single trips up to a total driving time of
99 hours and 59 minutes, and up to a total distance of 9,999 miles
(9,999 km), depending on the instrument cluster version. If one of the
maximum values is exceeded, then the memory is automatically cleared and
starts again from 0.
Total trip memory
Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under Settings> MFI data.
Displays that are not enabled will not appear.
Display
Function
Driving time in hours (h) and minutes (min) corresponding to trip memories 1
and 2 (toggle).
Travel time
Consumption
--.- mpg
Current fuel consumption in miles per gallon (l/100 km) while driving.
When units are set to miles, dashes appear instead of a number when the
engine is running and the vehicle is standing still.
When units are set to kilometers, the display shows liters consumed per
hour when the engine is running and the vehicle is standing still.
Consumption
--.- l/100 km
Av. consumption
--.- mpg
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
memories 1 and 2 (toggle) is displayed once the vehicle has been driven
about 330 feet (100 m). Until then, dashes appear instead of a number. The
value displayed is updated every 5 seconds.
Av. consumption
--.- l/100 km
Estimated distance in miles (km) that the vehicle can go with the fuel left in
the tank the way you are currently driving. Takes account of the current fuel
consumption, among other things.
Range
Diesel engines only: Estimated distance in miles (km) that the vehicle can
go with the AdBlue left in the tank. Visible only when the AdBlue range has
fallen to less than 1500 mi or 2400 km.
Range
Route
ꢀ
Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Average speed on trips per trip memories 1 and 2 (toggle). Displayed once
the vehicle has been once the vehicle has been driven about 300 feet
(100 m). Until then, dashes appear instead of a number. The value
displayed is updated every 5 seconds.
Average speed
0 speed
Digital display of current vehicle speed.
Oil temp.
Current engine oil temperature (digital display; 3.6 liter engine only).
Speed warning
--- mph
When the set speed (from 20–155 mph or 30–250 km/h) is exceeded, an
acoustic warning sounds, and a visual message may also appear in the
English 