Fig. 146 Window on the top of the 12 V vehicle battery (general example).
1. Depending on the vehicle equipment, an additional bracket must be removed to see the viewing window. An additional tool that is not available in the vehicle
tool kit is required to do this.
2. Make sure there is enough light to clearly see the color indicator in the circular window on the top of the 12 V vehicle battery (arrow) fig. 146. Never use open
flames or smoldering objects to provide light.
The color indicator in the circular window changes depending on the acid level in the 12 V vehicle battery.
Light yellow or colorless The 12 V vehicle battery acid level is too low. Have the 12 V vehicle battery checked and/or replaced by an authorized Volkswagen
dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen
Service Facility.
Black
The 12 V vehicle battery acid level is OK.
WARNING
Always wear eye protection and safety gloves.
Battery acid is highly corrosive. It can burn skin and cause blindness. When handling 12 V vehicle batteries, always protect your hands, arms, and face
from spraying battery acid.
Never tilt the 12 V vehicle battery. Acid can leak out of the vent openings and can cause chemical burns.
Never open a 12 V vehicle battery.
If battery acid comes into contact with the skin or eyes, rinse the affected area immediately with cold water for several minutes. Then consult a doctor
immediately.
Consult a doctor immediately if battery acid is swallowed.
Charging, replacing, disconnecting, or connecting the 12 V vehicle battery
Please read the introductory information and heed the Warnings and Notice ⇒
and Safety precautions for working in the engine compartment .
If you suspect that the 12 V vehicle battery is damaged or malfunctioning, see suitably qualified professionals to have the 12 V vehicle battery checked. Volkswagen
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Charging the 12 V vehicle battery
The 12 V vehicle battery should be charged by suitably qualified professionals because the 12 V vehicle battery that is installed at the factory requires a charging
process where the voltage is limited ⇒
. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Replacing the 12 V vehicle battery
The 12 V vehicle battery is designed to fit the location where it is installed and is equipped with safety features. If a 12 V vehicle battery needs to be replaced, have
the replacement part fitted by qualified professionals. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service
Facility. Check with qualified professionals to find out the component information regarding size and the required maintenance, performance, and safety features.
They must possess the necessary technical documentation and equipment. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized
Volkswagen Service Facility. The vent opening on the 12 V vehicle battery must always be located on the negative terminal. The vent opening on the positive
terminal side must be sealed.
Only use a maintenance-free 12 V vehicle battery that conforms to the TL 825 06 and VW 7 50 73 standards. These standards must be from October 2014 or later.
Always have the 12 V vehicle battery replaced by qualified professionals because the vehicle electronics must be adapted as part of the replacement. In addition,
the battery parameters for functional safety can only be determined with the OEM battery. Only qualified professionals have the necessary equipment to perform the
adaptation and have access to the correct replacement batteries. Using unsuitable batteries may invalidate the operating license.
Disconnecting the 12 V vehicle battery
If the 12 V vehicle battery must be disconnected from the vehicle electrical system, note the following:
1. Switch off all electrical equipment and the ignition.
2. Unlock the vehicle before disconnecting the battery. Otherwise, the anti-theft alarm system will be triggered.
3. Disconnect the negative cable first, and then the positive cable ⇒
.
Connecting the 12 V vehicle battery
1. Switch off all electrical equipment and the ignition before reconnecting the 12 V vehicle battery.
2. Connect the positive cable first, and then the negative cable ⇒
.
Various indicator lights may turn on after connecting the 12 V vehicle battery and switching the ignition on. They will turn off after driving a short distance at a speed
of approximately 10 - 12 mph (15 - 20 km/h). If the indicator lights do not turn off, see an authorized Volkswagen dealer or authorized Volkswagen Service Facility to
have the vehicle checked.
If the 12 V vehicle battery was disconnected for a long period of time, the next scheduled maintenance may not display correctly or it may not be calculated correctl
250