1. Remove the fixing element → Fig. 2 1 from the cross member in the opposite direction to the arrow B .
2. To release the cross member → Fig. 1 1 , pull up the end cap → Fig. 1 1 on both sides → Fig. 1 (arrow A ).
3. Remove and stow the cross member → Fig. 1 1 .
Stowing the fixing set
Under the luggage compartment floor: stowing the cross
member.
1
Cross member of the fixing set.
The fixing elements can be inserted in the lower area of the right side trim. The cross member can be stowed in the area of the rear
bench seat under the luggage compartment floor.
1. Lift the luggage compartment floor at the rear and pull it back slightly.
2. Insert the cross member → Fig. 3 1 as shown.
3. Close the luggage compartment floor again.
WARNING
In the event of a sudden braking manoeuvre or accident, objects could be flung through the interior of the vehicle and lead to severe
or fatal injuries.
● Before starting your journey, make sure that the rear seat backrest (→ Rear bench seat) and the fixing set holders are securely
engaged.
● Use suitable lashing or securing straps when securing heavy objects.
The multifunction pocket can help to prevent light items of cargo from sliding around in the luggage compartment. Depending on the
equipment, the removed multifunction pocket can be stowed under the luggage compartment floor.
Installing and removing the multifunction pocket
English 