Advertisement

Advertisement

Fuses -> Fuse overview of the fuses in the dash panel for Your Volkswagen Polo SUV Seventh Generation (2021-2025)

2. Push restrictor upwards into the opening of the holder and pull out to the side in the direction of the arrow → Fig. 2 1 .  
3. Press the stop pin in the direction of the arrow and at the same time open the glove box further → Fig. 2 2 .  
Installing the cover  
1. Move glove box into position.  
2. Insert the restrictor into the opening in the holder and slide upwards in the opposite direction to the arrow until it engages  
→ Fig. 2 1 .  
3. Carefully push the glove box forwards past the resistance of the catches → Fig. 2 2 .  
The overview shows the fuse locations of the electrical consumers relevant for the driver. The first column in the overview contains the  
location. The other columns contain the amp rating, the fuse type and the electrical consumer protected by the fuse.  
Depending on country and on the equipment of your vehicle, the fuse numbers and positions may differ to those given in the overview.  
If necessary, ask a suitably qualified workshop for the exact fuse layout. Volkswagen recommends using an authorised Volkswagen  
repairer.  
Fuse assignment  
In the dash panel: fuse locations.  
Fuse location → Fig. 1:  
F4  
, light switch.  
F5  
, electric glass roof.  
F6  
, central locking.  
F8  
, blower regulator.  
F19  
F20  
F28  
F29  
F31  
F36  
F43  
F49  
F50  
F52  
F54  
F55  
, Infotainment system.  
, rear window heating.  
, anti-theft alarm.  
, anti-theft alarm.  
, air conditioning block.  
, horn.  
, rear window wiper.  
, exterior lighting, front left.  
, exterior lighting, front right.  
, exterior lighting, rear left.  
, exterior lighting, rear right.  
, cigarette lighter, sockets.  
Fuse locations for vehicles with factory-fitted towing bracket:  
F1  
cartridge fuse, trailer control unit.  
F10  
, trailer charging cable.  
F60  
F61  
cartridge fuse, trailer control unit, right.  
cartridge fuse, trailer control unit, left.  
Electric windows and electrically adjustable seats may be protected by circuit breakers or control units which switch on again  
automatically a few seconds after the overload, e.g. frozen windows, has been rectified.  
Preparations  
1. Switch off the ignition, the lights and all electrical consumers.  
Detecting a blown fuse  
Blown fuse (illustration).  
®
®
If a flat blade fuse (ATO , MINI ) has blown, this can be recognised from the top and side through the transparent housing due to the  
melted metal strip → Fig. 1  
.
®
If a cartridge fuse (JCASE ) has blown, this can be recognised from the top through the transparent housing due to the melted metal  
strip → Fig. 1  
.
Fuse types  
®
Standard flat blade fuse (ATO ).  
®
Small flat blade fuse (MINI ).  
®
Cartridge fuse (JCASE ).  
Colour coding of fuses  
.
Colour  
Amp rating