2. Push restrictor upwards into the opening of the holder and pull out to the side in the direction of the arrow → Fig. 2 1 .
3. Press the stop pin in the direction of the arrow and at the same time open the glove box further → Fig. 2 2 .
Installing the cover
1. Move glove box into position.
2. Insert the restrictor into the opening in the holder and slide upwards in the opposite direction to the arrow until it engages
→ Fig. 2 1 .
3. Carefully push the glove box forwards past the resistance of the catches → Fig. 2 2 .
The overview shows the fuse locations of the electrical consumers relevant for the driver. The first column in the overview contains the
location. The other columns contain the amp rating, the fuse type and the electrical consumer protected by the fuse.
Depending on country and on the equipment of your vehicle, the fuse numbers and positions may differ to those given in the overview.
If necessary, ask a suitably qualified workshop for the exact fuse layout. Volkswagen recommends using an authorised Volkswagen
repairer.
Fuse assignment
In the dash panel: fuse locations.
Fuse location → Fig. 1:
F4
, light switch.
F5
, electric glass roof.
F6
, central locking.
F8
English 