Get Uconnect Phone -> Operation Guide for Volkswagen Routan SUV First Generation (2009-2014)

Uconnect™ Phone — IF EQUIPPED

features Bluetooth௡ technology - the global standard that

Uconnect™ Phone is a voice-activated, hands-free, in- enables different electronic devices to connect to each

vehicle communications system. Uconnect™ Phone al- other without wires or a docking station, so Uconnect™

lows you to dial a phone number with your cellular Phone works no matter where you stow your cellular

phone using simple voice commands (e.g., ЉCall” ѧ phone (be it your purse, pocket, or briefcase), as long as

“Mike” ѧ”WorkЉ or ЉDial” ѧ “248-555-1212Љ). Your cellular your phone is turned on and has been paired to the

phone’s audio is transmitted through your vehicle’s vehicle’s Uconnect™ system. Uconnect™ Phone allows

audio system; the system will automatically mute your up to seven cellular phones to be linked to the system.

radio when using the Uconnect™ Phone.

Only one linked (or paired) cellular phone can be used

with the system at a time. The system is available in

English, Spanish, or French languages.

NOTE: The Uconnect™ Phone requires a cellular phone

equipped with the Bluetooth௡ ЉHands-Free Profile,Љ Ver-

sion 0.96 or higher.

WARNING!

Uconnect™ Phone allows you to transfer calls between

the system and your cellular phone as you enter or exit

your vehicle and enables you to mute the system’s

microphone for private conversation.

Any voice commanded system should be used only

in safe driving conditions following local laws and

phone use. All attention should be kept on the

roadway ahead. Failure to do so may result in an

accident causing serious injury or death.

Uconnect™ Phone is driven through your Bluetooth௡

“Hands-Free profile” cellular phone. uconnect™ phone

Phone Button

Uconnect™ Phone is fully integrated with the vehicle’s

The rearview mirror contains the microphone for the audio system. The volume of the Uconnect™ Phone can

system (depending on the type of mirror and radio be adjusted either from the radio volume control knob or

equipped), and either the radio or the mirror has the two from the steering wheel radio control (right switch), if so

control buttons

(Phone button) and

(Voice equipped.

Recognition button) that will enable you to access the

system.

The radio display will be used for visual prompts from

the Uconnect™ Phone such as ЉCELLЉ or caller ID on

certain radios.

Voice Recognition Button

Actual button location may vary with radio.

The individual buttons are described in the

“Operation” section.

Operation

Voice commands can be used to operate the Uconnect™

Phone system and to navigate through the Uconnect™

Phone menu structure. Voice commands are required

after most Uconnect™ Phone prompts. You will be

prompted for a specific command and then guided

through the available options.

Uconnect™ Phone can be used with any Hands-Free

Profile certified Bluetooth௡ cellular phone. If your cellu-

lar phone supports a different profile (e.g., Headset

Profile) you may not be able to use any Uconnect™

Phone features. Refer to your cellular service provider or

the phone manufacturer for details.

•

Prior to giving a voice command, one must wait for

the beep, which follows the ЉReadyЉ prompt or another

prompt.

•

For certain operations, compound commands can be Help Command

used. For example, instead of saying ЉSetupЉ and then If you need assistance at any prompt, or if you want to

ЉPhone Pairing,Љ the following compound command know your options at any prompt, say ЉHelpЉ following

can be said: ЉSetup Phone Pairing.Љ

the beep. Uconnect™ Phone will play all the options at

any prompt if you ask for help.

For each feature explanation in this section, only the

combined form of the voice command is given. You To activate Uconnect™ Phone from idle, simply press the

can also break the commands into parts and say each

part of the command when you are asked for it. For

example, you can use the combined form voice com-

mand ЉPhonebook New Entry,Љ or you can break the

combined form command into two voice commands:

ЉPhonebookЉ and ЉNew Entry.Љ Please remember,

Uconnect™ Phone works best when you talk in a

normal conversational tone, as if speaking to someone

sitting a few feet/meters away from you.

button and follow the audible prompts for direc-

tions. All Uconnect™ Phone sessions begin with a press

of the

button on the radio control head.

Cancel Command

At any prompt, after the beep, you can say ЉCancelЉ and

you will be returned to the main menu. However, in a

few instances the system will take you back to the

previous menu.

Pair (Link) Uconnect™ Phone to a Cellular Phone

To begin using your Uconnect™ Phone, you must pair

your compatible Bluetooth௡ enabled cellular phone.

Voice Command Tree

Refer to “Voice Tree” in this section.

To complete the pairing process, you will need to refer-

ence your cellular phone Owner’s Manual.

•

For identification purposes, you will be prompted to

give the Uconnect™ Phone a name for your cellular

phone. Each cellular phone that is paired should be

given a unique phone name.

The following are general phone to Uconnect™ Phone

pairing instructions:

You will then be asked to give your cellular phone a

priority level between 1 and 7, with 1 being the highest

priority. You can pair up to seven cellular phones to

your Uconnect™ Phone. However, at any given time,

only one cellular phone can be in use, connected to

your Uconnect™ Phone. The priority allows the

Uconnect™ Phone to know which cellular phone to

use if multiple cellular phones are in the vehicle at the

same time. For example, if priority 3 and priority 5

phones are present in the vehicle, the Uconnect™

Phone will use the priority 3 cellular phone when you

make a call. You can select to use a lower priority

cellular phone at any time (refer to ЉAdvanced Phone

ConnectivityЉ in this section).

•

Press the

button to begin.

After the ЉReadyЉ prompt and the following beep, say

ЉSetup Phone Pairing.Љ

•

When prompted, after the beep, say ЉPair a PhoneЉ and

follow the audible prompts.

You will be asked to say a four-digit Personal Identi-

fication Number (PIN), which you will later need to

enter into your cellular phone. You can enter any

four-digit PIN. You will not need to remember this PIN

after the initial pairing process.

Dial by Saying a Number

•

The system will prompt you to say the name of the

person you want to call.

•

Press the

button to begin.

After the ЉReadyЉ prompt and the following beep, say

the name of the person you want to call. For example,

you can say ЉJohn Doe,Љ where John Doe is a previ-

ously stored name entry in the Uconnect™ Phonebook

or downloaded phonebook. To learn how to store a

name in the phonebook, refer to ЉAdd Names to Your

Uconnect™ Phonebook,Љ in this section.

After the ЉReadyЉ prompt and the following beep, say

ЉDial.Љ

•

The system will prompt you to say the number you

want to call.

•

For example, you can say Љ234-567-8901Љ.

Uconnect™ Phone will confirm the phone number and

then dial. The number will appear in the display of

certain radios.

•

Uconnect™ Phone will confirm the name and then dial

the corresponding phone number, which may appear

in the display of certain radios.

Call by Saying a Name

Add Names to Your Uconnect™ Phonebook

•

Press the

button to begin.

NOTE: Adding names to the Uconnect™ Phonebook is

recommended when the vehicle is not in motion.

After the ЉReadyЉ prompt and the following beep, say

“Call.Љ

•

Press the

button to begin.

•

After the ЉReadyЉ prompt and the following beep, say Uconnect™ Phone will allow you to enter up to 32 names

ЉPhonebook New Entry.Љ

in the phonebook with each name having up to four

associated phone numbers and designations. Each lan-

guage has a separate 32-name phonebook accessible only

in that language. In addition, if equipped and supported

by your phone, Uconnect™ Phone automatically down-

loads mobile phone’s phonebook.

•

When prompted, say the name of the new entry. Use of

long names helps the voice recognition and it is

recommended. For example, say ЉRobert SmithЉ or

ЉRobertЉ instead of ЉBob.Љ

When prompted, enter the number designation (e.g.,

ЉHome,Љ ЉWork,Љ ЉMobile,Љ or ЉPagerЉ). This will allow

you to store multiple numbers for each phonebook

entry, if desired.

Phonebook Download – Automatic Phonebook

transfer from Mobile phone

If equipped and specifically supported by your phone,

Uconnect™ Phone automatically downloads names (text

When prompted, recite the phone number for the names) and number entries from the mobile phone’s

phonebook entry that you are adding.

phonebook. Specific Bluetooth௡ Phones with Phone Book

Access Profile may support this feature.

After you are finished adding an entry into the phone-

book, you will be given the opportunity to add more

phone numbers to the current entry or to return to the

main menu.

•

To call a name from downloaded (or Uconnect™

Phone) Phonebook, follow the procedure in “Call by

Saying a Name” section.

•

Automatic download and update, if supported, begins

as soon as the phone Bluetooth௡ wireless connection is

made to the Uconnect™ Phone. For example, after you

start the vehicle.

•

This downloaded phonebook cannot be edited or

deleted on the Uconnect™ Phone. These can only be

edited on the mobile phone. The changes are trans-

ferred and updated to Uconnect™ Phone on the next

phone connection.

•

Maximum of 1000 entries per phone will be down-

loaded and updated every time a phone is connected Phonebook Download — Single Entry

to the Uconnect™ Phone.

If equipped and supported by your phone, Uconnect™

Phone allows the user to download entries from their

phone via Bluetooth௡. To use this feature, press the

button and say “Phonebook Download.” The system

prompts, “Ready to accept “V” card entry via

Bluetooth௡…” The system is now ready to accept phone-

book entries from your phone using the Bluetooth௡

Object Exchange Profile (OBEX). Please see your phone

Owner’s Manual for specific instructions on how to send

these entries from your phone.

Depending on the maximum number of entries down-

loaded, there may be a short delay before the latest

downloaded names can be used. Until then, if avail-

able, previous downloaded phonebook is available for

use.

•

Only the phonebook of the currently connected mobile

phone is accessible.

Only the Mobile phone’s phonebook is downloaded.

SIM card phonebook is not part of the Mobile phone-

book.

NOTE:

Edit Uconnect™ Phonebook Entries

NOTE:

•

The phone handset must support Bluetooth௡ OBEX

transfers of phonebook entries to use this feature.

•

Editing names in the phonebook is recommended

when the vehicle is not in motion.

•

Some phones cannot send phonebook entries if they

are already connected to any system via Bluetooth௡,

and you may see a message on the phone display that

the Bluetooth௡ link is busy. In this case, the user must

first disconnect or drop the Bluetooth௡ connection to

the Uconnect™ Phone, and then send the address

book entry via Bluetooth௡. Please see your phone

Owner’s Manual for specific instructions on how to

drop the Bluetooth௡ connection.

•

Automatic downloaded phonebook entries cannot be

deleted or edited.

•

Press the

button to begin.

After the ЉReadyЉ prompt and the following beep, say

ЉPhonebook Edit.Љ

•

You will then be asked for the name of the phonebook

entry that you wish to edit.

•

If the phonebook entry is longer than 24 characters, it

will only use the first 24 characters.

Next, choose the number designation (home, work,

mobile, or pager) that you wish to edit.

When prompted, recite the new phone number for the

phonebook entry that you are editing.

After you are finished editing an entry in the phonebook,

you will be given the opportunity to edit another entry in

the phonebook, call the number you just edited, or return

to the main menu.

•

After you enter the Phonebook Delete menu, you will

then be asked for the name of the entry that you wish

to delete. You can either say the name of a phonebook

entry that you wish to delete or you can say ЉList

NamesЉ to hear a list of the entries in the phonebook

from which you choose. To select one of the entries

ЉPhonebook EditЉ can be used to add another phone

number to a name entry that already exists in the

phonebook. For example, the entry John Doe may have a

mobile and a home number, but you can add ”John

Doe’s” work number later using the ЉPhonebook EditЉ

feature.

from the list, press the

button while the

Uconnect™ Phone is playing the desired entry and say

ЉDelete.Љ

•

After you enter the name, the Uconnect™ Phone will

ask you which designation you wish to delete: home,

work, mobile, pager, or all. Say the designation you

wish to delete.

Delete Uconnect™ Phonebook Entry

NOTE: Delete phonebook entries is recommended

when the vehicle is not in motion.

•

Note that only the phonebook entry in the current

language is deleted.

•

Press the

button to begin.

After the ЉReadyЉ prompt and the following beep, say

ЉPhonebook Delete.Љ

Automatic downloaded phonebook entries cannot be

deleted or edited.

Delete/Erase “All” Uconnect™ Phonebook Entries

•

After the ЉReadyЉ prompt and the following beep, say

ЉPhonebook List Names.Љ

•

Press the

button to begin.

The Uconnect™ Phone will play the names of all the

phonebook entries, including the downloaded phone-

book entries, if available.

After the ЉReadyЉ prompt and the following beep, say

ЉPhonebook Erase All.Љ

•

The Uconnect™ Phone will ask you to verify that you

wish to delete all the entries from the phonebook.

•

To call one of the names in the list, press the

button during the playing of the desired name, and

say ЉCall.Љ

After confirmation, the phonebook entries will be

deleted.

NOTE: The user can also exercise ЉEditЉ or ЉDeleteЉ

Note that only the phonebook in the current language operations at this point.

is deleted.

•

Uconnect™ Phone will then prompt you as to the

Automatic downloaded phonebook entries cannot be

deleted or edited.

number designation you wish to call.

The selected number will be dialed.

•

List All Names in the Uconnect™ Phonebook

Press the button to begin.

Phone Call Features

The following features can be accessed through the

Uconnect™ Phone if the feature(s) are available on your

•

Uconnect Phone -> Operation for Your Volkswagen Routan SUV First Generation (2009-2014)

Related Topics

Uconnect Phone

Popular Owner Manuals

Latest Owner Manuals