Advertisement

Advertisement

Renewing Lambda probe -> 4.2 Renewing LSU Lambda probe (6-pin) for Your Volkswagen Sharan VAN First Generation (1995-2010)

Bora 1999 ➤ , Bora Variant 1999 ➤ , CC 2010 ➤ , Eos 2006 ➤ , Golf 199 ...  
Electrical System, General Information - Edition 07.2010  
– Clean battery terminal using underside of battery terminal  
cleaner with circular movements.  
WARNING  
Danger of injury! Observe warning notices and safety regula‐  
lk  
tions ⇒ page 2 !  
– Reconnect battery and tighten battery terminals to specified  
torque.  
Note  
Optimum contact is ensured when the components to be secured  
are tightened to the specified torque after cleaning.  
3.1.4  
Anti-corrosion treatment  
Caution  
Missing anti-corrosion treatment results in damage to the on‐  
board supply.  
Note  
All threaded connections must be tightened to specified tor‐  
que.  
Always use hose supplied with anticorrosive agent tin.  
Use protection wax for cold area.  
Use cavity sealing agent for warm area.  
The sealing agent independently reaches the respective  
points through capillary action.  
– Hold injector below ring terminal and spray pin all around.  
3. Contact surface cleaning set VAS 6410  
113