Get Driver assist systems -> Front Assist Guide for Volkswagen T Cross SUV First Generation (2018-2025)

Brake system and Antiblockiersystem faulty

Function restriction

illuminates together with

The function may be restricted or unavailable in the

following cases:

— Stop driving! Seek the help of a specialist

garage.

— About 30 seconds after starting (

the instrument cluster)

lights up in

— When driving around a sharp bend

— During an ESC intervention

Front Assist

Functionality

Settings

Front Assist monitors the distance to the vehicle

ahead and points out when the safety distance is ex-

ceeded. In borderline situations, it helps to avoid

a collision by braking interventions.

Automatic activation

Front Assist is automatically activated when the ig-

nition is switched on.

Status display in the instrument cluster display

Activation/deactivation in the instrument cluster

illuminates – safety distance too small

— Press the button on the multifunction steering

wheel.

sion

illuminates – warning in case of colli-

— Select Front Assist

Activation/deactivation in Infotainment

Applies to 10″ Infotainment:

Automatic braking if there is a risk of a collision

If there is a risk of a collision, the following symbol is

In the menu

Car Assistance Systems.

illuminated as a warning

from the isolation

box. If you do not respond to the warning, the vehi-

cle will slow down.

Show system deactivation in the display of the in-

strument cluster

At a driving speed of up to 30 km / h, the vehicle is

braked without prior warning.

illuminates together with

Automatic braking can be stopped by pressing the

accelerator pedal or by a steering intervention.

illuminates together with

With automatic braking, the pressure in the brake

system increases. The brake pedal cannot be operat-

ed by using the pedal as normal.

Front Assist when on a truck or a car ferry

service or similar.

WARNING

Risk of an accident!

Front Assist does not respond to crossing or on-

coming vehicles.

Troubleshooting

Front Assist system is not available

illuminates together with

Operating conditions

Or:

✓

The ASR is active.

illuminates together with

The driving speed is higher than 5 km/h.

— Clean the front radar sensor.

— Stop the engine and start again.

— If Front Assist is still unavailable, check the brake

lights on the vehicle or on the attached trailer.

— If the brake lights are working and Front Assist is

still unavailable, seek the help of a specialist ga-

rage.

illuminates – cruise control is activated

illuminates - cruise control is activated

flashes - the set limit is exceeded

When cruise control is started, the set limit

value is displayed.

There was an unfounded warning or system inter-

vention

— Clean the front radar sensor.

Applies to the analogue instrument cluster.

— If the system is not working properly, disable

Front Assist and seek the help of a specialist ga-

rage.

illuminates – speed limiter is activated

illuminates together with

is active

When speed control is started,

- cruise control

is high-

Pedestrian detection system

lighted and the set limit value is displayed.

Functionality

flashes - the set limit is exceeded

Pedestrian recognition helps to prevent a collision

with crossing or lengthwise moving pedestrians by

enabling automatic braking interventions.

Status display in the instrument cluster display

Operating conditions

lights up – Danger of collision

✓

The driving speed is higher than 30 km/h.

Risk of collision in a speed range of 5-30 km/h

The system triggers automatic braking.

Operation

Risk of collision in a speed range of 30-60 km/h

The system warns of a collision hazard first. If the

driver does not respond, the vehicle is automatically

braked.

Operation via the multifunction steering wheel

Operating conditions

✓

Front Assist is activated.

The vehicle speed is 5-60 km/h.

Activate speed limiters

Applies to vehicles with cruise control.

Speed limiter

— First activate the cruise control system by press-

Functionality

ing the

button.

— Activate the speed limiter by pressing the but-

ton.

The speed limiter controls the maximum driving

speed according to the set speed limit.

When the governor is activated, there is no speed

control.

If the limit is exceeded when driving downhill, brake

the vehicle with the brake pedal.

Activate speed limiters

Status display in the instrument cluster display

Applies to vehicles without cruise control.

Applies to the digital instrument cluster.

— Press the

button.

Driver assist systems

Driver assist systems -> Front Assist for Your Volkswagen T Cross SUV First Generation (2018-2025)

Related Topics

Driver assist systems

Popular Owner Manuals

Latest Owner Manuals