Advertisement

Advertisement

Driver assist systems -> Speed limiter for Your Volkswagen T Cross SUV First Generation (2018-2025)

— If the brake lights are working and Front Assist is  
still unavailable, seek the help of a specialist ga-  
rage.  
illuminates – cruise control is activated  
illuminates - cruise control is activated  
flashes - the set limit is exceeded  
When cruise control is started, the set limit  
value is displayed.  
There was an unfounded warning or system inter-  
vention  
— Clean the front radar sensor.  
Applies to the analogue instrument cluster.  
— If the system is not working properly, disable  
Front Assist and seek the help of a specialist ga-  
rage.  
illuminates – speed limiter is activated  
illuminates together with  
is active  
When speed control is started,  
- cruise control  
is high-  
Pedestrian detection system  
lighted and the set limit value is displayed.  
Functionality  
flashes - the set limit is exceeded  
Pedestrian recognition helps to prevent a collision  
with crossing or lengthwise moving pedestrians by  
enabling automatic braking interventions.  
Status display in the instrument cluster display  
Operating conditions  
or  
lights up – Danger of collision  
The driving speed is higher than 30 km/h.  
Risk of collision in a speed range of 5-30 km/h  
The system triggers automatic braking.  
Operation  
Risk of collision in a speed range of 30-60 km/h  
The system warns of a collision hazard first. If the  
driver does not respond, the vehicle is automatically  
braked.  
Operation via the multifunction steering wheel  
Operating conditions  
Front Assist is activated.  
The vehicle speed is 5-60 km/h.  
Activate speed limiters  
Applies to vehicles with cruise control.  
Speed limiter  
— First activate the cruise control system by press-  
Functionality  
ing the  
button.  
— Activate the speed limiter by pressing the but-  
ton.  
The speed limiter controls the maximum driving  
speed according to the set speed limit.  
When the governor is activated, there is no speed  
control.  
If the limit is exceeded when driving downhill, brake  
the vehicle with the brake pedal.  
Activate speed limiters  
Status display in the instrument cluster display  
Applies to vehicles without cruise control.  
Applies to the digital instrument cluster.  
— Press the  
button.  
96  
Driver assist systems  
When the governor is activated, there is no speed  
control.  
WARNING  
Risk of the cruise control system starting uninten-  
tionally!  
Start speed control  
Deactivate cruise control after use.  
— Press the  
button.  
·
Status display in the instrument cluster display  
Applies to the digital instrument cluster.  
Setting the speed limit  
Increase limit in steps of 1 km/h  
illuminated - the cruise control system is ac-  
tivated  
Decrease limit in steps of 1 km/h  
Increase/decrease limit in steps of 10 km/h  
Interrupting cruise control  
illuminated - cruise control is active  
Press button  
or  
.
When cruise control starts, the set speed is dis-  
played.  
Applies to the analogue instrument cluster.  
Resume speed control  
— Press the button.  
illuminated - the cruise control system is ac-  
tivated  
If no speed limit is set, the current speed is set as  
the speed limit.  
illuminates together with  
is active  
- cruise control  
highligh-  
Deactivate speed limiter  
— Keep the  
button pressed down.  
When the cruise control is started, it is  
ted and the set speed is displayed  
Switch between overspeed governor and cruise con-  
trol system  
— Press the button.  
Switching to cruise control interrupts the cruise con-  
trol.  
Operating conditions  
The driving speed is higher than 20 km/h.  
Exceeding the speed limit  
Fully depress the accelerator.  
Cruise control continues as soon as the vehicle de-  
celerates below the set speed limit.  
Operation  
Operation via the multifunction steering wheel  
Troubleshooting  
Speed limiter faulty  
illuminates  
— Seek the help of a specialist garage.  
Cruise control system  
Activate/deactivate cruise control system  
Functionality  
— Press the  
button.  
When cruise control is activated, there is no cruise  
control.  
The cruise control system maintains the set speed  
without the accelerator pedal having to be operated.  
This, however, is only possible to the extent permit-  
ted by the engine output and braking power of the  
vehicle.  
Start speed control  
— Press the  
button.  
Cruise control system  
97