Launch Control Program
The Launch Control Program gives the vehicle maximum acceleration from a standing start.
1. To start the Launch Control Program, tap ASR Off on the Infotainment system.
tap ESC Off.
activate ESC Sport by tapping this mode.
2. Depress and hold the brake pedal with your left foot.
3. Select position.
activate Tiptronic mode.
4. Press the accelerator with your right foot until an engine speed of approximately 2,000 to 4,000 rpm is held automatically.
Depending on the vehicle model, a text message on the instrument cluster display indicates that the Launch Control Program has
been activated.
5. To start the vehicle with maximum acceleration, take your left foot off the brake →
.
6. After acceleration, switch TCS, ESC back on again or switch off ESC Sport.
The Launch Control Program is available only if the gearbox has been “driven warm” and the steering wheel is in “straight-
ahead position”.
WARNING
Fast acceleration or switching off TCS or ESC or activation of ESC Sport can lead to a loss of traction and skidding. On slippery roads
in particular, e.g. in wet or icy conditions or on dirty road surfaces, this can lead to loss of control over the vehicle, accidents and
serious or fatal injuries.
● Always adapt your driving style to the traffic.
● Use the kickdown function, the Launch Control Program or fast acceleration only if visibility, weather, road and traffic conditions
permit, and other road users are not put at risk due to the vehicle acceleration and the driving style.
● After acceleration, switch TCS or ESC back on again, or switch ESC Sport off again.
WARNING
Constant braking will cause the brakes to overheat. This can considerably reduce the braking effect, increase the braking distance
and, in certain circumstances, cause the brake system to fail completely. This can result in accidents and serious or fatal injuries.
● Never “ride” the brake pedal or press the brake pedal too often and for too long.
NOTICE
The gearbox is not lubricated if the vehicle rolls with the engine switched off. The automatic gearbox could overheat and be
damaged.
● If the vehicle is stopped on an uphill gradient with an engaged position, do not hold it by pressing the accelerator but by braking.
● Never allow the vehicle to roll in gear selector position , particularly if the engine is switched off.
NOTICE
Vehicles with Launch Control Program: accelerating with the Launch Control Program places heavy strain on all vehicle components.
This can lead to higher wear.
● Use the function only when the vehicle is at operating temperature.
NOTICE
If the brake pads “rub” due to light pressure on the brake pedal, this will increase wear.
● If you do not really need to brake, never allow the brakes to “rub” with light pedal pressure.
Engine does not start
The indicator lamp lights up green.
Brake pedal was not depressed, e.g. when trying to engage another position with the driving mode selector.