Advertisement

Advertisement

Driving assist systems -> Offroad display for Your Volkswagen Tayron SUV First Generation (2018-2025)

The offroad display contains digital instruments that show additional information about the vehicle and its surroundings. This makes  
it possible to assess the current driving situation more precisely.  
Opening the offroad display  
1. Tap the  
function button on the Infotainment system.  
Driving dynamics menu  
The steering angle is shown in the menu and it is possible to adapt various vehicle systems:  
Adjust ESC.  
Activate or deactivate Hill Descent Control.  
Display driving profile.  
Hill Descent Control is automatically activated in the Offroad driving profile.  
Display menu  
Off-road display (illustration).  
Depending on equipment, additional information about the vehicle and the surroundings may be displayed in the menu.  
the compass shows the current driving direction.  
the steering angle of the vehicle is displayed. The value is positive for a left steering angle and negative for a  
right steering angle.  
the altimeter shows the current height above sea level.  
the display corresponds to the temperature display on the instrument cluster.  
the display corresponds to the oil temperature display on the instrument cluster.  
Selecting instruments and setting units  
The displayed instruments can be changed:  
1. Swipe vertically over the individual instruments → Fig. 1.  
The units of measurement can be adjusted for some instruments in the Infotainment system (→ Vehicle settings menu).  
Adapting the display areas to the driving situation  
The instruments displayed can be selected depending on the driving situation, the environmental conditions and the offroad  
conditions:  
oil and coolant temperature display, steering angle display.  
steering angle display, coolant temperature display, altimeter (country-dependent).  
steering angle display, altimeter (country-dependent), compass  
Off-road display on the home screen  
A reduced view of the off-road displays is shown on the home screen.  
The tile can be restored in the off-road display settings.  
The example stated in this chapter must be understood as general guidelines that are intended to help the driver to drive safely when  
driving offroad. However, it is not possible to predict whether these guidelines will be valid for all situations that could occur. Before  
driving in unknown terrain, it is crucial to obtain knowledge about the characteristics of the terrain ahead. This will enable you to  
assess potential danger in advance. The driver is responsible for deciding whether the vehicle is suitable for the terrain in question and  
whether it is possible to drive across the terrain.  
Driving offroad demands different skills and driving styles in comparison to driving on roads.  
The vehicle is not built for “expedition-type” travel.  
The driver can use 4MOTION Active Control to activate a variety of vehicle settings in an all-wheel drive vehicle as required (→ Driving  
profile selection).  
Switch off the driver assist and parking systems when driving offroad.  
Checklist  
Before every journey, the following steps should be taken in order to be able to drive and control the vehicle away from surfaced roads:  
Observe the general safety notes for driving off-road (→ Offroad driving).  
Fold in or remove the ball coupling.  
Adjust the seat position so that you have a good view to the front. Fasten seat belts (→ Sitting position).  
Always wear suitable, well-fitting shoes that provide good grip for your feet when using the pedals.  
A responsible driver should respect the environment when driving offroad. Remember that driving through undergrowth and  
on meadows can destroy animal and plant habitats.  
Leaking service fluids due to vehicle damage can pollute the environment. Spilt service fluids must be collected and  
disposed of properly and with respect for the environment.  
Take suitable accessories and equipment with you when driving offroad.