Depending on the equipment level, the luggage compartment floor is height-adjustable.
1. Remove any retaining or securing straps if necessary.
2. Open the luggage compartment floor slightly (→ Luggage compartment floor (with catch)).
3. Pull the luggage compartment floor to the rear out of the guides at the sides of the luggage compartment → Fig. 1 (arrow A ).
4. Insert the luggage compartment floor into the guides at the required height, push it forwards as far as it will go and place down
→ Fig. 1 (arrow B or C ).
NOTICE
Incorrect use can damage the variable luggage compartment floor or the trim of the luggage compartment.
● Do not allow the luggage compartment floor to fall when closing it, but always guide it downwards carefully.
● Always distribute loads (maximum 75 kg (165 lbs)) over as wide an area as possible on the luggage compartment floor in order to
avoid point loads.
● Transport heavy loads only when the luggage compartment floor is in the lower position.
Depending on equipment, there may be stowage space for small items under the luggage compartment floor.
Volkswagen recommends that you secure items to the fastening rings with the aid of fixing or securing straps.
In the luggage compartment: turning over the reversible
floor covering (illustration).
The luggage compartment floor can be adapted to the type of loads carried by means of the reversible floor covering.
Turning over the reversible floor covering
1. Lift the reversible floor covering at the rear edge in the direction of the arrow → Fig. 1.
2. Turn over the reversible floor covering and place on the luggage compartment floor.
English 