Design of the selector lever
Selector lever E313
Selector lever locked in position P switch
F319
Hall senders in the selector lever mounting register the
position of the selector lever and make it available to
the mechatronic unit via the CAN bus.
If the selector lever is in the "P" position, the switch
transmits the signal – selector lever in "P" position –
to the steering column electronics control unit J527.
The control unit requires this signal to control the
ignition key withdrawal lock.
Selector lever lock solenoid N110
The solenoid locks the selector lever in the "P" and
"N" positions. The solenoid is controlled by the
selector lever sensors control unit J587.
Locking pin latch "P"
lk
Selector lever E313
F319
Locking pin latch "N"
N110
S390_007
Hall senders for detecting
the selector lever position
7
English 