Selector lever
Selector lever lock solenoid N110
How it works:
Selector lever
lock solenoid N110
Selector lever locked in "P" position
If the selector lever is set to "P", the locking pin is
located in locking pin latch "P". This prevents the
locking lever from being moved unintentionally.
Compression
spring
Locking pin
latch for "P"
Locking pin
S390_008
Selector lever released:
After switching on the ignition and actuating the foot
brake, the selector lever sensors control unit J587
supply the selector lever lock solenoid N110 with
current. As a result of this, the locking pin is withdrawn
from the locking pin latch "P".
lk
The selector lever can now be moved to the drive
position.
S390_009
Selector lever locked in "N" position
If the selector lever is set to the "N" position for longer
than 2 sec., the control unit supplies the solenoid with
current. As a result of this, the locking pin is pressed
into locking pin latch "N". The selector lever can no
longer be unintentionally moved into a gear. The
locking pin is released when the brake is actuated.
Locking pin
latch for "N"
S390_ 010
8
English 